ECOGRIP MITAR LeMan Cut 5
ECOGRIP MITAR HIBERNIA CUT 5
The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”.
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
FALCON
The cut protection glove FALCON by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema® Diamond Technolo gy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high level of cut protection (Level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry Parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
DYNASTAR PU
The cut protection glove DYNASTAR PU by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. span >
The fine glove from a high-tech company ser with poly / glass is certified according to EN 388: 2016 (4 5 4 2).
The ½ immersion from Polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
EOS NOCUT VV910
ECOGRIP MITAR WB
The cut protection glove MITAR WB by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove made of HPPE and glass fiber is certified according to EN 388: 2016 (4 X 4 4 D) and has a ho hen cut protection (Level D) according to EN 13997.
The ECOGRIP ® ½ immersion made of blue nitrile is very suitable for handling oily parts. The coating is oil- and liquid-tight and breathable.
VENICUT42GN
BLUETEC DYNAFORCE F
The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
FALCON S
The cut protection glove FALCON S by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema ® Diamond Techno logy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for wet handling and drier parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb. The glove also has a cuff made of natural cotton.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
DYNASTAR PU 75
The cut protection glove DYNASTAR PU75 by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. span >
The fine glove from a high-tech Fiber with poly / glass is certified according to EN 388: 2016 (4 5 4 2).
The ¾ - Polyurethane immersion is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.