ECOGRIP MITAR LeMan Cut 5
ECOGRIP MITAR HIBERNIA CUT 5
The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”.
ECOMASTER PLUS C ESD
The cut protection glove ECOMASTER PLUS C ESD by W + R INDUSTRY is cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and carbon is certified according to EN 388: 2016 (4 X 4 3 C) and has a medium cut protection (Level C) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling dry and wet Parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the carbon fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
CALOR
The cut protection glove CALOR from W + R INDUSTRY is highly cut-resistant and offers perfect comfort thanks to its anatomical layered cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 388: 2003 (4 5 4 4).
In addition, the glove is certified according to EN 407: 2004 (4 1 3 X 4 X) and can be used according to DIN EN 12477: 2005 can be used for TIG welding and also for heavy welding work (type A + B).
The palm of the CALOR is made of split cowhide, the backhand made of red split cowhide. The lining on the back of the hand is made of flame-resistant cotton twill, the inside of the hand is made of Kevlar® tricot. The long cuff is made of soft but sturdy split leather and also has a pulse protection.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
TIGER LONG
The cut protection glove TIGER LONG by W + R INDUSTRY is highly cut-resistant and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (4 5 4 3).
The palm and backhand of the TIGER LONG is made of red split leather. The lining is made of a high-cut resistant textile. The long cuff is made of split leather and also has a pulse protection.
ADLER 2
The cut protection glove ADLER 2 by W + R INDUSTRY is cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (3 3 3 3)
The palm of the ADLER 2 is made of grain leather, the backhand made of a cotton fabric. The lining on the back of the hand and palm is made of a Kevlar® jersey (complete, including cuff).
ECOMASTER PLUS E ESD
The cut protection glove ECOMASTER PLUS E ESD by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of micro HPPE fiber with polyamide, glass and steel is certified according to EN 388: 2016 (4 X 4 2 E) and has a very high cut protection (Level E) according to EN 13997.
The ECOMASTER ® ½ immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Through The steel fibers in the knitted fabric make the glove touchscreen capable and also receive electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
CALOR II
The cut protection glove CALOR II from W + R INDUSTRY is highly cut-resistant and offers with its anatomical layered cut perfect wearing comfort.
D he glove is certified according to EN 388: 2016 (4 X 4 4 E).
In addition, the glove is according to EN 407: 2004 certified (4 1 3 X 4 X) and can be used according to DIN EN 12477: 2005 for TIG welding and also for heavy welding work (type A + B).
The palm of the CALOR is made of cow split leather, the backhand made of red cow split leather . The lining on the back of the hand and the palm is a Kevlar® tricot. The long cuff is made of soft but sturdy split leather and also has a pulse protection.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
BLACK HAWK
The cut protection glove BLACK HAWK by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The glove is certified according to EN 388: 2016 (3 3 3 4 X).
The palm of the BLACK HAWK is made of turned goatskin, the backhand made of goat grain leather. The lining on the back of the hand is made of cotton interlock, the inside of the hand is made of Kevlar®. The short cuff is made of turned goatskin.
ECOMASTER PLUS F ESD
The cut protection glove ECOMASTER PLUS F ESD by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / span>
The fine glove made of micro HPPE fiber with polyamide, steel and basalt is certified according to EN 388: 2016 (4 X 4 2 F) and has a very high level of cut protection (level F) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling drier and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the steel fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
CHROME
The cut protection glove CHROME by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The very fine glove made of Dyneema® Diamond Technolo gy (220dtex) is certified according to EN 388: 2016 (4 3 3 1 B) and has good cut protection (level B) according to EN 13997.
The ECOGRIP® ½-immersion made of sanded nitrile is very suitable for handling wet and drier parts. The coating is oil-resistant, liquid-repellent and breathable.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>
