OPTIFLUX 7300
Electromagnetic flowmeter for low conductivity liquids (≥0.05 μS/cm)
- Ceramic tube with non-wetted electrodes for extremely adhesive and abrasive media
- Hygienic and vacuum resistant
- Flange or wafer version: DN25…100 / 1…4″, max. PN40 / ASME Cl :300
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
OPTIPROBE
Electromagnetic insertion-type flowmeter for water and wastewater applications
- With fixed or flexible installation length for hot tapping
- 0…+100°C; max. 16 barg
- For pipes ≥DN80 / 3″
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP, PROFINET
DWM 2000
Electromagnetic insertion-type flowmeter for flow monitoring of conductive media
- Ideal for liquids, pastes and slurries (≥20μS/cm), suitable for immersed applications (IP68)
- -25…+150°C / -13…+302°F; up to 25 barg / 360 psig
- For pipes DN25…400 / 1…16″, optional >DN400 / 16″
- 3-wire, 4…20 mA
OPTISONIC 3400
Ultrasonic flowmeter for liquid process applications
- Accurate 3-path meter: large dynamic range, maintenance-free, no pressure loss
- Cryogenic (-200°C/-328°F) and HT (+250°C/+482°F) versions; viscosities up to over 1000 cSt
- Flange: DN25…3000 / 1…120″, max. PN200 / ASME Cl 1500; also weld-ends
- 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP
OPTISONIC 3400 District Heating
Ultrasonic flowmeter for district heating applications
- 3-path meter for thermal energy measurement and heated water
- CT: OIML R75, MID MI-004 (Class 1, 2, 3)
- Flange: DN25…2000 / 1…80″, max. PN40 / ASME Cl 300
- Max. +180°C / +356°F
OPTISONIC 4400 HP
Ultrasonic flowmeter for high pressure liquids
- 2-path meter for flow measurement of condensate, high pressure feedwater, spray water or water injection
- Operating pressure up to 490 bar / 7107 psi
- Max. DN1000 / 40″, up to ASME Cl 4500
- 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP
OPTISONIC 4400 HT
Ultrasonic flowmeter for high temperature liquids
- 2-path meter for flow measurement of thermal oil, boiler feed water, crudes and hot feed flows in refineries
- Up to +600°C / +1112°F
- Flange: max. DN1000 / 40″
- 3 x 4…20 mA, HART®7, Modbus, FF, Profibus-PA/DP
OPTISONIC 6300 P
Ultrasonic clamp-on flowmeter for temporary flow measurement of liquids
- Portable, battery-powered meter, for on-site verification of process flows or inline meters at any location
- -40…+120°C / +248°F
- For pipes DN15…1500 / ½…60″
- With data logger and USB interface for data transfer
OPTISONIC 6300
Ultrasonic clamp-on flowmeter for flow measurement of liquids
- Stationary device, for installation at any location without process interruption or need to cut pipes
- Up to +200°C / +392°F
- Robust stainless steel sensor rail for pipes DN15…4000 / ½…160″
- 4…20 mA, HART®7, Modbus
OPTISONIC 7300
Ultrasonic flowmeter for natural gas, process gas and utility gas applications
- 2-path meter, for standard volume flow metering, independent of media properties
- No maintenance, no pressure loss, large dynamic range
- Flange: DN50…1000 / 2…40″, max. PN450 / ASME Cl 2500; also weld-in connections
- 3 x 4…20 mA, HART®, Modbus, FF
OPTISONIC 7300 Biogas
Ultrasonic flowmeter for biogas, landfill and sewage gas applications
- 1- or 2-path meter for low pressure biogas (dry or wet) with a high CO2 content
- Integrated gas volume correction and methane content measurement
- Lap joint flange: DN50…200 / 2…8″, max. PN10 / ASME Cl 150
- Large turndown ratio (100:1)
ALTOSONIC V12
Ultrasonic flowmeter for custody transfer (CT) measurement of gases
- 12-chord meter, for high accuracy flow metering of natural gas
- CT: OIML R137 (class 0.5), MI-002, AGA9 etc.
- Many variants, extensive CBM diagnostics free of charge
- Flange: DN100…1600 / 4…64″; max. PN450 / ASME Cl 2500