| Brand |
CS Instruments |
|---|
Innovative sensor design optimised for indicative online monitoring of your compressed air quality, specified in ISO 8573-5. Suppression of technologically based, false positive alarms caused by non-standard gaseous impurities in the sample gas, such as ethanol (C2H6O).
No oxygen required in the test gas for operation.
The high-precision, optical particle counter PC 400 measures particles from a size of 0.1 µm and is therefore suitable for monitoring compressed air quality class 1 (ISO 8573). The proper functioning of the filtration elements installed in the compressed air is monitored and any filter breakthroughs are detected immediately.
For measurement of all humidity parameters under pressure up to 16 bar. The portable dew point meter with integrated, rechargeable battery has been developed especially for the eld use. Besides a highly precise dew point sensor the device also contains a precise pressure sensor up to 16 bar. So in addition to the dew point in °Ctd, the temperature in °C and the line pressure in bar also further moisture parameters (% RH, mg/m3, g/m3) as well as pressure-dependent measuring values (g/kg, ppm v/v, atm. dew point °C) can be calculated.
Portable compressed air quality measurement, residual oil - particles - residual moisture - mobile transport carriage including wheels (external dimensions 0.68 x 1.06 x 0.41 m) (WxHxD) with permanently mounted components of the OIL CHECK 500, PC 400, FA 510. DS 500 - The intelligent chart recorder The chart recorder DS 500 is the centrepiece of the compressed air quality measurement system, where the measurement data from the sensors for residual oil, particles and residual moisture are measured and documented. The measured values are displayed graphically on the 7″ colour display. The integrated data logger stores the measured values safely and reliably.
The new leak meters LD 500/510 with integrated camera and leakage calculation are ideal measuring instruments which help to find and document even smallest leakages (0.1 l/min corresponds to approx. 1 € p. a.) easily even in far distances. LD 510 is the worldwide first leak meter with an additional freely assignable sensor input for all CS sensors. In addition to the leakage measurement and detection also all necessary measurements with regards to dew point, flow, pressure, and temperature ... can be carried out.
The proven FA 510 dew point sensor is now available with an IO-Link interface . The IO-Link interface enables easy integration of dew point measurement in front of machines and systems. Optionally available with integrated pressure sensors . Monitoring a desiccant dryer is crucial for increasing energy efficiency, ensuring product quality, preventing damage to machinery, recognising maintenance requirements and achieving cost savings. This contributes to the smooth functioning of compressed air systems in various industrial applications. The sensor technology and evaluation electronics of our sensors have undergone continuous improvement. This implies an increased precision at varying ambient temperatures and a higher signal resolution of the sensor. Similar to their predecessor models, the new dew point sensors are characterised by long-lasting, stable and reliable measurement results. The sensor element is insensitive to condensation and is protected from direct contact with contaminated particles by the stainless steel sintered cap.
