Coating: nitrile.
Back reinforcement: TPR.
Second Work / Craftman
Services / Logistics
Construction / Civil Engineering
Heavy Industry
Oil / Gas
Cutting
Wearing
Shock
Perforation
Double nitrile coating for oily work
1st smooth nitrile coating : impermeable to oils
2nd nitrile foam coating : good adhesion
Flexible reinforcements
Increased protection from impacts and pinches
Reinforcement between the thumb and index finger and on the palm
Increased protection
Protection against impact in the metacarpal area. After an energy impact of 5J, the force transmitted to the back of the hand cannot exceed 4 kN
Available only with header card
Very good abrasion and cut resistance
Increased lifespan
Kevlar® thread stitching
Increased lifespan
8 cm cuff with Velcro closure
Perfect adjustment
Reduced discomfort at the wrist, during prolonged use
Safe, qualitative and very comfortable; the EOS NOCUT is surely one of the gloves with the most interest on the market!
Reference | Bar code | Colour | Size | ||
---|---|---|---|---|---|
VV910JA09–EOS NOCUT VV910 | 3295249191559 | 60 | 12 | Yellow-Grey-Black | 09 |
VV910JA10–EOS NOCUT VV910 | 3295249191566 | 60 | 12 | Yellow-Grey-Black | 10 |
REGULATION (EU) 2016/425
EN420:2003+A1:2009 General requirements
5 | Dexterity (from 1 to 5) |
EN388:2016 Protective gloves against mechanical Risks (Levels obtained on the palm)
4 | Resistance to abrasion (from 1 to 4) | |
X | Resistance to cutting (from 1 to 5) | |
4 | Resistance to tear (from 1 to 4) | |
3 | Resistance to puncture (1 to 4) | |
D | Resistance to cutting by sharp objects (TDM EN ISO 13997) (from A to F) | |
P | Protection against impact in metacarpal area (P) (EN13594:2002 6.8.2) |
EN13594:2002 4.1.3/6.8.2. Impact energy attenuation
USA STANDARDS
ANSI-ISEA 105:2016 Hand protection
A4 | Resistance to cutting by sharp objects (from A1 to A9) |