ECOMASTER PLUS F ESD
The cut protection glove ECOMASTER PLUS F ESD by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / span>
The fine glove made of micro HPPE fiber with polyamide, steel and basalt is certified according to EN 388: 2016 (4 X 4 2 F) and has a very high level of cut protection (level F) according to EN 13997.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling drier and wet parts. The coating is liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
Due to the steel fibers in the knitted fabric the glove is touchscreen capable and also has electrostatic properties (ESD). The electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
Related products
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
ALUSTAR III
The heat protection glove ALUSTAR 3 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 3 is made of red split leather, the backhand made of aluminum-coated split leather, including that of the inserted thumb. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.
ACER I
The assembly glove ACER 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ½ immersion from high-tech micro- Nitrile foam works very well for the Ha ndling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of polyamide is certified according to EN 388: 2003 (4 1 2 1).
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ALUSTAR II
The heat protection glove ALUSTAR 2 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 2 is made of red cow split leather, the backhand made of aluminum-coated split leather. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.
ANATOMIC ECO II
The work glove ANATOMIC ECO II from W + R INDUSTRY in Canadian style offers perfect wearing comfort thanks to its anatomical fit.
The palm and the knuckle protection are made of cow split leather, the backhand is made of abrasion-resistant u nd breathable cotton twill. The lining on the palm is made of soft polyester. The cotton cuff also has a pulse protection.
The glove is certified according to EN 388: 2003 (4 2 4 4).
& nbsp ;
ADLER 2
The cut protection glove ADLER 2 by W + R INDUSTRY is cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (3 3 3 3)
The palm of the ADLER 2 is made of grain leather, the backhand made of a cotton fabric. The lining on the back of the hand and palm is made of a Kevlar® jersey (complete, including cuff).
BLUETEC DYNAFORCE F
The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
CHROME
The cut protection glove CHROME by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. p >
The very fine glove made of Dyneema® Diamond Technolo gy (220dtex) is certified according to EN 388: 2016 (4 3 3 1 B) and has good cut protection (level B) according to EN 13997.
The ECOGRIP® ½-immersion made of sanded nitrile is very suitable for handling wet and drier parts. The coating is oil-resistant, liquid-repellent and breathable.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>