SMARTPAT COND 1200
Conductive conductivity sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male)
- 0.1…20 mS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
SMARTPAT COND 3200
Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes and Pt1000 for temperature compensation
SMARTPAT COND 5200
Conductive conductivity sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: G¾ (male), ¾ NPT (male)
- 10 μS…15 mS/cm; Max. +130°C / +266°F; 16 bar / 232 psi
- With graphite electrodes and Pt1000 for temperature compensation
SMARTPAT COND 7200
Conductive conductivity sensor for food, beverage and pharmaceutical applications
- 2-wire loop powered, 4…20 mA/HART®7, for direct connection to a PCS
- Process connection: VARIVENT® N, Tri-Clamp 1½”, 2″
- 0.05…1000 μS/cm; Max. +135°C / +275°F; 16 bar / 232 psi
- With stainless steel electrodes (Ra <0.8 μm) and Pt1000 for temperature compensation
OPTISENS COND 1200
Conductive conductivity sensor for water, wastewater, process water or pure water
- For use with analytical transmitter
- Process connection: G½, G¾, G1, ¾ NPT (male)
- 0.05 μS/cm…20 mS/cm; Max. +135°C / +275°F
- With two stainless steel, titanium or graphite electrodes and Pt100 for temperature compensation
OPTISENS COND 7200
Conductive conductivity sensor for hygienic applications
- For use with analytical transmitter
- Process connection: Clamp DN25-40, 1½”
- 0.05…1000 μS/cm; Max. +135°C / +275°F
- Short or long version with stainless steel electrodes and Pt100 for temperature compensation
OPTISENS IND 1000
Inductive conductivity sensor for water, wastewater and chemical applications
- For use with analytical transmitter
- Process connection: G1½ union nut and immersion versions
- 1…2000 mS/cm; Max. +100°C / +212°F
- Electrodeless conductivity sensor with Pt1000 for temperature compensation
OPTISENS IND 7000
Inductive conductivity sensor for food and beverage applications
- For use with analytical transmitter
- Process connection: Dairy screw (DIN 11851) DN50 and DN65, VARIVENT® N, G1½ or G2 (male, non-hygienic)
- 0.5…2000 mS/cm; Max. +125°C / +257°F (for SIP/CIP); 10 bar / 145 psi
- Sterilisable PEEK sensor (FDA and EC1935/2004 conform) with temperature compensation
OPTISYS IND 7100
Inductive conductivity measuring system for food and beverage applications
- 4-wire, 4…20 mA, with head-mounted transmitter
- Process connection: Conical nozzle (DIN 11851) DN50
- 0.5…2000 mS/cm; Max. +120°C / +248°F; 10 bar / 145 psi
- PEEK sensor (FDA and EC1935/2004), with temperature compensation
OPTISYS IND 8100
Inductive conductivity measuring system for food and beverage applications
- 4-wire, 4…20 mA, with head-mounted or remote transmitter
- Process connection: G1 for hygienic adapters
- 0.05…1000 mS/cm; Max. +140°C / +285°F; 10 bar / 145 psi
- Hygienic PEEK sensor, robust (IP69K), with temperature compensation
OPTISENS CL 1100
Potentiostatic amperometric disinfectant sensor for water and wastewater applications
- For use with MAC 100 analytical transmitter
- Process connection: PG13.5
- Cl2: 0.03…20 mg/l; ClO2: 0.05…5 mg/l; O3: 0.05…5 mg/l; Max. +70°C / +158°F; 6 bar / 87 psi
- Membrane-free sensor with 2 gold electrodes and sensor cleaning feature
OPTISYS CL 1100
Potentiostatic amperometric disinfectant measuring system for water and wastewater applications
- Completely mounted with MAC 100 analytical transmitter (Output: 3 x 4…20 mA)
- Pre-installed and tested; for bypass lines
- Cl2: 0.03…20 mg/l; ClO2: 0.05…5 mg/l; O3: 0.05…5 mg/l; Max. +50°C / +122°F; 6 bar / 87 psi
- With chlorine sensor, valves, flow cells, optional pH sensor
Water analysis panel
New
Multi-parameter measuring system for water quality monitoring
- Flexibility in selecting different water parameters: dissolved oxygen, turbidity, conductivity, pH/ORP
- Installation on compact analytical modules: All measuring points at one location
- Completely pre-wired and pre-assembled for easy bypass installation
SMARTPAT ORP 1590
Potentiometric ORP sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: ¾ NPT (male)
- -1500…+1500 mV; Max. +80°C / +176°F; 6.9 bar / 100 psi
- Sensor with CPVC body, platinum electrode, ceramic diaphragm and Pt1000 temperature sensor
SMARTPAT ORP 8150
Potentiometric ORP sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- -1500…+1500 mV; Max. +130°C / +266°F; 12 bar / 174 psi
- Glass sensor with platinum electrode, open diaphragm and Pt1000 temperature sensor
SMARTPAT ORP 8510
Potentiometric ORP sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- -1500…+1500 mV; Max. +70°C / +158°F; 2 bar / 30 psi
- Glass sensor with platinum electrode, ceramic diaphragm and Pt1000 temperature sensor
OPTISENS ORP 8500
Potentiometric ORP sensor for water and wastewater applications
- For use with analytical transmitter
- Process connection: PG13.5
- -1500…+1500 mV; Max. +70°C / +158°F; 2 bar / 30 psi
- Glass sensor with platinum electrode and ceramic diaphragm
OPTISENS ORP 8590
Potentiometric ORP sensor for water and wastewater applications
- For use with analytical transmitter
- Process connection: ¾ NPT (male)
- -2000…+2000 mV; Max. +80°C / +176°F; 6.9 bar / 100 psi
- Sensor with CPVC body, platinum electrode, ceramic diaphragm and Pt100 temperature sensor
OPTISENS ADO 2000
Amperometric oxygen sensor for water and wastewater applications
- For use with analytical transmitter
- For immersion or insertion
- 0…20 mg/l; Max. +50°C / +122°F; 6 bar / 87 psi
- With stainless steel sensor body, rugged PTFE membrane, exchangeable electrode cartridge and temperature compensation
OPTISENS ODO 2000
Optical oxygen sensor for water and wastewater applications
- For use with analytical transmitter
- For immersion or insertion
- 0…20 mg/l; Max +50°C / +122°F; 6 bar / 87 psi
- With rugged PVC sensor body, available with spray cleaning nozzle (immersion version)
SMARTPAT PH 1590
Potentiometric pH sensor for potable, process or treated water applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: ¾ NPT (male)
- 0…14 pH; Max. +80°C / +176°F; 6.9 bar / 100 psi
- With CPVC sensor body, ceramic diaphragm and Pt1000 for temperature compensation
SMARTPAT PH 8150
Potentiometric pH sensor for chemicals and industrial wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +130°C / +266°F; 12 bar / 174 psi
- Glass sensor with open diaphragms and Pt1000 for temperature compensation
SMARTPAT PH 8320
Potentiometric pH sensor for water and wastewater applications
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +70°C / +158°F; 10 bar / 145 psi
- Glass sensor with PTFE diaphragm and Pt1000 for temperature compensation
SMARTPAT PH 8530
Potentiometric pH sensor for pure water and low conductivity media (>2 μS/cm)
- 2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
- Process connection: PG13.5
- 0…14 pH; Max. +80°C / +176°F; 12 bar / 174 psi
- Glass sensor with 3 ceramic diaphragms and Pt1000 for temperature compensation