Cut protection glove
ECOGRIP MITAR LeMan Cut 5
The cut protection glove MITAR LeMan CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high en cut protection (Level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Skin tolerance tested and received the grade “very good”.
ECOGRIP MITAR HIBERNIA CUT 5
The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”.
ECOGRIP MITAR S
The cut protection glove MITAR LeMan CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high en cut protection (Level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Skin tolerance tested and received the grade “very good”.
BLUETEC DYNAFORCE C
The cut protection glove Dynaforce C < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine one Glove made of HPPE yarn with technical basalt fiber is certified according to DIN EN 388: 2016 (4 X 3 3 C) and has a medium cut protection (level C) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce C is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
- < li class = "cs64D34F3">
FALCON S
. cs95E872D0 {text-align: left; text-indent: 0pt; margin: 0pt 0pt 0pt 0pt} .cs1B16EEB5 {color: # 000000; background-color: transparent; font-family: Calibri; font-size: 11pt; font-weight: normal; font-style: normal;} .csDC4A80 {color: # 000000; background-color: transparent; font-family: Calibri; font-size: 11pt; font-weight : bold; font-style: normal;} .cs64D34F3 {text-align: left; margin: 0pt 0pt 0pt 0pt; list-style-type: disc; color: # 000000; background-color: transparent; font-family: Arial ; font-size: 11pt; font-weight: normal; font-style: normal}
The cut protection glove FALCON S by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of Dyneema ® Diamond Techno logy (725dtex) is certified according to EN 388: 2016 (4 5 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for wet handling and drier parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb. The glove also has a cuff made of natural cotton.
The glove was tested for its skin tolerance by Dermatest® and received the grade “very good”.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
DEFENDER I
The cut protection glove DEFENDER by W + R INDUSTRY is highly cut-resistant and offers perfect wearing comfort thanks to its anatomical layered cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 388: 2003 (3 5 4 3). < / span>
The palm of the DEFENDER is made of turned grain leather, the backhand made of blue split leather. The lining on the back of the hand is made of cotton twill, that in the palm of tricot with Kevlar®. The long cuff is made of split leather and also has a pulse protection.
The glove was tested by Dermatest® for its skin compatibility and received the grade “very good”.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
ECOGRIP MITAR W
The cut protection glove MITAR W by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove made of HPPE and fiber optics & nbsp ; is certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ¾ two-layer immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
HERKULO CUT
The cut protection glove;HERKULO CUT;from W+R INDUSTRY fits perfectly to the hand thanks to its ready-made cotton liner with cuff made of artificial leather;and offers a high wearing comfort.
The double full dipping of abrasion-resistant nitrile is well suited for handling wet or oily;parts. The coating is liquid-tight and has a very high abrasion resistance.
The;Cut protection glove made of high-quality and raw cotton also has a liner made of Kevlar in the palm®;is certified according to DIN EN 388:2016 (4 X 3 2 C) and DIN EN 407:2004 (X 2 X X X X) and has good cut protection (Level C) according to EN 13997.
DYNASTAR PU
The cut protection glove DYNASTAR PU by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove from a high-tech company ser with poly / glass is certified according to EN 388: 2016 (4 5 4 2).
The ½ immersion from Polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids.
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
ECOGRIP MITAR WB
The cut protection glove MITAR WB by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The fine glove made of HPPE and glass fiber is certified according to EN 388: 2016 (4 X 4 4 D) and has a ho hen cut protection (Level D) according to EN 13997.
The ECOGRIP ® ½ immersion made of blue nitrile is very suitable for handling oily parts. The coating is oil- and liquid-tight and breathable.
BLUETEC DYNAFORCE F
The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.