VIBRAMAX 2 links, Kurzfinger
Related products
BLUETEC DYNAFORCE F
The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
BLUETEC SPUN
The cut protection glove Dynaforce C < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine one Glove made of HPPE yarn with technical basalt fiber is certified according to DIN EN 388: 2016 (4 X 3 3 C) and has a medium cut protection (level C) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce C is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
- < li class = "cs64D34F3">
CANADIAN I
The work glove CANADIAN I by W + R INDUSTRY in Can adian style offers good wearing comfort thanks to its hand-adapted cut.
The palm and the knuckle protection are made of cow grain leather, the backhand is from abrasion estem and breathable cotton twill. The lining on the palm is made of soft polyester. The cotton cuff also has a pulse protection.
The glove is certified according to EN 388: 2003 (3 1 4 2).
& nbsp ;
ACER I
The assembly glove ACER 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ½ immersion from high-tech micro- Nitrile foam works very well for the Ha ndling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of polyamide is certified according to EN 388: 2003 (4 1 2 1).
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
BLUETEC LEVIS
The assembly glove LEVIS 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½ immersion made of polyurethane (matt black ) is very suitable for that Handling of wet and dry parts. The coating is breathable, oil-resistant and offers a high level of impermeability to liquids on the palm.
p >
The very fine protective glove made of polyamide fiber is certified according to EN 388: 2016 (3 1 2 1 X).
< p class = "cs95E872D0">
DEFENDER I
The cut protection glove DEFENDER by W + R INDUSTRY is highly cut-resistant and offers perfect wearing comfort thanks to its anatomical layered cut.
< span class = "cs1B16EEB5">
The glove is certified according to EN 388: 2003 (3 5 4 3). < / span>
The palm of the DEFENDER is made of turned grain leather, the backhand made of blue split leather. The lining on the back of the hand is made of cotton twill, that in the palm of tricot with Kevlar®. The long cuff is made of split leather and also has a pulse protection.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
ALUSTAR III
The heat protection glove ALUSTAR 3 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 3 is made of red split leather, the backhand made of aluminum-coated split leather, including that of the inserted thumb. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.