ECOMASTER ULTIMO ESD
The ESD protective glove uh ECOMASTER ULTIMO ESD from W + R INDUSTRY has been tested in accordance with EN 13650, and thanks to its seamless 3D knitted fabric, it adapts perfectly to the Hand on and offers a very high level of comfort.
The ECOMASTER ® ½-immersion made of eco-polymer is very suitable for handling electronic parts. The coating is liquid-repellent and yet breathable.
The assembly glove made of high-strength polyamide fiber with carbine is certified according to EN 388: 2016 (4 1 4 & nbsp ; 1 X).
The carbon fibers in the knitted fabric give the glove electrostatic properties ( ESD). These electrostatic properties have been tested and confirmed in accordance with DIN EN 16350: 2014 (electrostatic properties of protective gloves).
span>
Related products
BLACK HAWK
The cut protection glove BLACK HAWK by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The glove is certified according to EN 388: 2016 (3 3 3 4 X).
The palm of the BLACK HAWK is made of turned goatskin, the backhand made of goat grain leather. The lining on the back of the hand is made of cotton interlock, the inside of the hand is made of Kevlar®. The short cuff is made of turned goatskin.
BLUETEC DYNAFORCE D
The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.
The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.
The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.
The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.
The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.
BLUETEC LEVIS
The assembly glove LEVIS 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The ½ immersion made of polyurethane (matt black ) is very suitable for that Handling of wet and dry parts. The coating is breathable, oil-resistant and offers a high level of impermeability to liquids on the palm.
p >
The very fine protective glove made of polyamide fiber is certified according to EN 388: 2016 (3 1 2 1 X).
< p class = "cs95E872D0">
CORIUM I
The work glove CORIUM I by W + R INDUSTRY in mechanic style offers perfect wearing comfort thanks to its anatomical fit with a layered cut.
The palm is made of soft cow split leather, the backhand is made of bi-elastic spandex. The lining on the palm is made of natural cotton. The knuckle protection is made of shock-absorbing high-tech foam. Finally, the glove has a highly elastic band with Velcro for a secure fit on the wrist.
p >
The glove is certified according to EN 388: 2003 (4 1 3 3) and is very suitable for simple work with dry, damp or dirty parts.
ACER I
The assembly glove ACER 1 by W + R INDUSTRY adapts perfectly to the hand thanks to its seamless 3D knit and is very comfortable to wear.
The ½ immersion from high-tech micro- Nitrile foam works very well for the Ha ndling wet and dry parts. The coating is oil-resistant, liquid-repellent and yet breathable.
The extremely fine protective glove made of polyamide is certified according to EN 388: 2003 (4 1 2 1).
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
ALUSTAR III
The heat protection glove ALUSTAR 3 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 3 is made of red split leather, the backhand made of aluminum-coated split leather, including that of the inserted thumb. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.
ALUSTAR II
The heat protection glove ALUSTAR 2 from W + R INDUSTRY reliably protects against radiant heat and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 407: 2004 (4th 1 3 4 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005. It is also certified according to EN 388: 2003 (4 2 2 2).
The palm of the ALUSTAR 2 is made of red cow split leather, the backhand made of aluminum-coated split leather. The lining is made of high quality cotton. The long cuff is made of split leather with an aluminum coating on the backhand.
CHROME
The cut protection glove CHROME by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. p >
The very fine glove made of Dyneema® Diamond Technolo gy (220dtex) is certified according to EN 388: 2016 (4 3 3 1 B) and has good cut protection (level B) according to EN 13997.
The ECOGRIP® ½-immersion made of sanded nitrile is very suitable for handling wet and drier parts. The coating is oil-resistant, liquid-repellent and breathable.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>