Ideal for refrigeration dryer applications with an accuracy of +/- 1°C in the measuring range -20…+50°Ctd. Gas-independent measurement, also suitable for other, non-corrosive gases Compact design, ideal for dryer installations Robust design, protection class IP 66 Condensation insensitive sensor element Long-term stability and drift-resistant, thus optimized calibration intervals Fast adaptation time, especially from dry to wet conditions BSP, NPT or UNF thread Analog output 4…20 mA (two- or three-wire) and Modbus RTU (RS 485) interface Measured values available in different units, pressure dew point [°Ctd], temperature [°C], rel. humidity [%rh], abs. humidity [g/m³], degree of humidity [g/kg], humidity fraction V/V [ppmV/V], water vapor partial pressure [hPa], atmospheric dew point [°Ctd.atm]. On-site sensor diagnostics with handheld device or CS Service Software
FA 510/515 – Dew point sensor for refrigeration dryers
| Marka |
CS Instruments |
|---|
İlgili ürünler
CMM 500 – High-precision measuring of the capacity of compressors
The CMM 500 Compressor Master Meter is a new type of reference flow measuring device that has been specially developed for high-precision measuring of the capacity of compressors and for billing compressed air. The CMM 500 can be used both directly downstream of the compressor for measuring wet compressed air and as a compressed air meter for consumption measurement and billing of dry compressed air. The large measuring span of 1:130 and an accuracy of <0.5 % of the measured value (0.2 Qmax to Qmax) are unique. Service or maintenance can be carried out at any time via the mounting plate (zero point correction, condensate drain, sensor replacement for calibration), even during operation under pressure.
Leak detector with camera LD 500/510
The new leak meters LD 500/510 with integrated camera and leakage calculation are ideal measuring instruments which help to find and document even smallest leakages (0.1 l/min corresponds to approx. 1 € p. a.) easily even in far distances. LD 510 is the worldwide first leak meter with an additional freely assignable sensor input for all CS sensors. In addition to the leakage measurement and detection also all necessary measurements with regards to dew point, flow, pressure, and temperature ... can be carried out.
DP 500 – Portable dew point meter with integrated data logger
The DP 500 Dew point meter with integrated Data logger is the ideal Portable Service instrument for Dew point measurement of all compressed air dryers down to -80°Ctd dew point. The 3.5" graphic display with touchscreen makes operation child's play. The graphic display of the coloured measurement curves is unique. Ideal for Measuring the current Dew point and for graphically displaying the dew point curve and the switching behaviour of the dryer over a longer period of time. Up to 100 million Measured values can be saved with date and measurement location name. Measured values can be transferred to a PC via USB stick. The data can be conveniently analysed using the CS Basic software (linked below). Measurement data and service reports can therefore be created quickly and easily at any time.
VA 525 – Compact Inline flow meter for compressed air and nitrogen
The innovative VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. The VA 525 is always used when many machines (compressed air consumers) have to be integrated into an energy monitoring network. Reduce your energy costs and increase your sustainability with the VA 525 compact sensor. Monitor the consumption of individual machines and analyze your leakage flows with just one measuring device.
