Faydalar
Performance in all protection classes
The Dräger X-plore 1700+ series offers effective protection against fine dust as well as solid and liquid particles in the workplace, e.g. in general industry, construction and services. The models of the series are available in all three protection classes FFP1, FFP2 and FFP3 according to EN 149:2001+A1:2009. The colour coding in dark-blue, light-blue and white for the three protection levels provides more safety when selecting the right mask.
CoolSAFE+™ filter material
The CoolSAFE+™ filter material ensures highest breathing comfort by reducing the breathing resistance to a minimum. This enables you to breathe easily and comfortably over longer periods of time. At the same time, the material features an excellent filter performance that effectively stops coarse and fine particles.
High wearing comfort and a secure seal
Alongside the material‘s filter performance, a secure seal without leakage is decisive in how effective the masks‘ protection is. The ergonomic form combined with soft material ensures that the Dräger X-plore 1700+ fits the face well. The internal nose pad and external nose clip hold the mask in place to seal effectively in the critical areas around the nose. This ensures the most comfort even during longer periods of use.
Ease of use
Dräger X-plore 1700+ is easy to handle. The VarioFLEX™ harness is simple to put on and remove, and sits without any pressure. The harness can be individually adjusted with EasyStop.
Low, lower, lowest
Low breathing resistances are decisive when it comes to comfort. Additionally, low breathing resistance leads to less exhaustion during longer work periods. Dräger X-plore 1700+ minimizes breathing resistances with the CoolSAFE+™ filter material: In contrast to the maximum allowed breathing resistances of the valid standard EN 149:2001+A1:2009 the actual measured values of the Dräger masks are much lower.
Breathe easier with the CoolMAX™ exhalation valve:
The CoolMAX™ exhalation valve flushes exhaled air optimally out of the mask. The breathing resistance is continually reduced making breathing especially easy. The humid and warm exhaled air is flushed out of the mask, preventing the fogging of eyewear and heat accumulation. The result: You enjoy highest level of comfort.
Önemli gerçekler
- Ürün tipi
- Tek kullanımlık toz maskesi
- Başvuru
- Tozlu ortamlarda çalışma
- E karşı korunma
- İnce tozlar, katı ve sıvı parçacıklar
- Maske gövdesi formu
- Düz katlanmış (yerden tasarruf sağlayan depolama ve kolay taşıma için)
- Koruma sınıfları EN 149
- FFP1, FFP2, FFP3
- EN 149 koruma sınıflarının renk kodlaması
- FFP1: koyu mavi; FFP2: açık mavi; FFP3: beyaz
- Tekrar Kullanılabilirlik
- ✗ (maks. bir vardiya)
- Bedenler TR
- Evrensel boyut (tüm koruma sınıfları)
Özellikleri
- Açılır seçenek
- ✓
- Ekshalasyon valfi
- Optionally available for FFP2 and FFP3
- Koku önleyici versiyon TR
- Ayarlanabilir kayış uzunluğu
- ✓
Malzemeler
- Maske gövdesi
- Non-woven fabric (CoolSAFE+ for extra low breathing resistance)
- Baş kayışları
- Sürekli döngülü yırtılmaz tekstil kayış
Onaylar
- EN 149:2001+A1:2009, (AB) 2016/425
- ✓
- AS/NZS 1716:2012
- ✓
- Dolomit tozu testi (D işareti)
- ✓
- NIOSH 42 CFR 84
- ✗
