Kesinlik < 0.5 % confirmed by DIN EN ISO/IEC 17025 certificate
Large measuring span > 1:130
Very fast measuring, detection of peaks, no transient response as with ultrasonic gas meters
No long inlet sections required
Extremely low pressure loss, with max. flow < 70 mbar
Can be used for practically all gases (by simply entering the respective gas density)
Pressure range up to 16 bar (g), 30 bar (g)/100 bar (g) on request
Direct display of standardised volume Nm3, Nm3/h, according to DIN 1343 or ISO 1217 compressed air standard
Further Measured values: Temperature in °C or F, Pressure, Differential pressure in bar, psi etc.
All common output signals: Modbus RTU, Modbus TCP, POE, MBus, 4 ... 20 mA
ATEX version for highly flammable and combustible Gases in progress
CMM 500 – High-precision measuring of the capacity of compressors
| Marka |
CS Instruments |
|---|
İlgili ürünler
VA 570 – Thermal mass flow meter for consumption measurement
Record and reduce your energy costs and increase your Sustainability with the VA 570 flow meter. Monitor your Consumption and analyse your leakage rate with a permanently installed flow meter in distribution stations, in front of individual departments or for billing purposes of individual Consumers.
Intelligent mobile chart recorder – DS 500 mobile
If we talk about operational costs of compressed air plants we are actually talking about the energy costs as they make up about 70 to 80 % of the total costs of a compressed air plant. Depending on the size of the plant this means considerable operating costs. Even in smaller plants this may quickly add up to 10 000 to 20 000 € per year. This is an amount which can be considerably reduced - even in case of well operated and maintained plants. For sure this also applies to your compressed air plant! Which actual costs per generated m³ air do you actually have? Which energy is gained due to the waste heat recovery? What is the total performance balance of your plant? How high are the differential pressures of single filters? How high is the humidity (pressure dew point)? How much compressed air is used? By means of the intelligent chart recorder DS 500 mobile and the suitable sensors and meters all these questions can be answered easily. For example by means of a long-term measurement over 7 days, data recording and evaluation at the PC.
FA 500 – Dew point sensor with integrated display and alarm relay
With the FA 500 you make the right choice for highest precision in dew point measurements. Our sensor offers a wide span of measuring ranges perfectly matched to the needs of different compressed air dryers. Rely on us for accurate results in any situation. Monitoring a compressed air dryer is critical to increase energy efficiency, ensure product quality, prevent machine damage, identify maintenance needs and achieve cost savings. This contributes to the smooth operation of compressed air systems in various industrial applications.
VA 525 – Compact Inline flow meter for compressed air and nitrogen
The innovative VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. The VA 525 is always used when many machines (compressed air consumers) have to be integrated into an energy monitoring network. Reduce your energy costs and increase your sustainability with the VA 525 compact sensor. Monitor the consumption of individual machines and analyze your leakage flows with just one measuring device.