FumiSense Pro-Lo is a handheld Methyl Bromide monitor for monitoring Methyl Bromide levels outside the fumigated stack/ silo/ ship to check for leaks. Equipped with an inbuilt air sampling pump and with the ability to measure MBr up to 200 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
Boreal Gasfinder3-MC
Data Acquisition System
Data Acquisition System
Data acquisition is an important function in Continuous Emission Monitoring Systems (CEMS). The main objective of the data acquisition system is to provide real time reports that can be used for compliance reporting, process improvements and environment performance management. With in-built GSM/LAN connectivity, the gas readings are uploaded to the cloud, where they can be viewed from anywhere in the world on a laptop or mobile device and alarm functions can easily be configured, allowing 24/7 continuous monitoring.
Dust Analyzer
Dust Analyzer
An optical instrument designed to measure the concentration of dust or particulate matter suspended in the exhaust gas passing through a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system.
Dust Analyzer uses the Innovative Dynamic Detection Principle (DDP) which measures fluctuations in the intensity of a light beam, using a folded beam Transceiver /Reflector arrangement. Increased particulate density in the stack causes the scattered light intensity to increase. When calibrated against reference standards, the intensity of this signal relates directly to the particulate concentration in the stack, and this can be used to display as a reading in mg/m³.
Fluorescence Based SO2 Stack Gas Analyzer
Fluorescence Based SO2 Stack Gas Analyzer
The Uniphos Fluorescence Based SO2 Stack Gas Analyzer is a reliable instrument with high sensitivity and selectivity which is designed and developed to meet customer’s requirement for measuring the concentration of SO2 in PPM levels. Specific optical filters in the fluorescence cell in addition to moisture and hydrocarbon scrubbing systems ensures removal of any interferences making the analyzer highly specific for SO2 detection.
The optical excitation of SO2 molecules results in fluorescence in the wavelength region typically between 240-420 nm and the fluorescence intensity is related to SO2 concentration.
The Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Auto/ Remote calibration. The analyzer comes with built in diagnostics and internal memory which can store the test results along with date and time.
Fluorescence Based SO2 Stack Gas Analyzer
Fluorescence Based SO2 Stack Gas Analyzer
The Uniphos Fluorescence Based SO2 Stack Gas Analyzer is a reliable instrument with high sensitivity and selectivity which is designed and developed to meet customer’s requirement for measuring the concentration of SO2 in PPM levels. Specific optical filters in the fluorescence cell in addition to moisture and hydrocarbon scrubbing systems ensures removal of any interferences making the analyzer highly specific for SO2 detection.
The optical excitation of SO2 molecules results in fluorescence in the wavelength region typically between 240-420 nm and the fluorescence intensity is related to SO2 concentration.
The Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Auto/ Remote calibration. The analyzer comes with built in diagnostics and internal memory which can store the test results along with date and time.
FumiGuard
FumiGuard
The Uniphos FumiGuard is an advanced continuous gas detection system for detecting Phosphine (PH3). It has been specially designed for applications like fence line or peripheral monitoring of a fumigated area.
It comprises of a master control unit and up to 8 gas detection heads. The modular design of the system enables the user to easily connect multiple detection heads in a loop (daisy chain), saving cable cost in the process. With in-built GSM connectivity, the gas readings are uploaded to the cloud, where they can be viewed from anywhere in the world on a laptop or mobile device and alarm functions can easily be configured, allowing 24/7 perimeter monitoring and ensuring compliance to local regulations.
FumiSense Pro MBr- Hi
FumiSense Pro MBr- Hi
FumiSense Pro-Hi is a handheld Methyl Bromide gas monitor for monitoring fumigation levels inside the fumigated stack/ silo/ ship to ensure the desired level of MBr is present inside. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring MBr up to 200 g/m3, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
FumiSense Pro PH3 – Hi (CO)
FumiSense Pro PH3 - Hi (CO)
FumiSense Pro–Hi is a handheld gas monitor for phosphine concentration measurement when CO is present along with phosphine, like in tobacco fumigation. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring PH3 up to 2000 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
FumiSense Pro PH3 – Lo
FumiSense Pro PH3 - Lo
FumiSense Pro-Lo is a handheld Phosphine monitor for monitoring phosphine levels outside the fumigated stack/ silo/ ship to check for leaks and to ensure the level of PH3 is less than the TLV. Equipped with an inbuilt air sampling pump and with the ability to measure PH3 up to 20 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
FumiSense Pro PH3 – Lo
FumiSense Pro PH3 - Lo
FumiSense Pro-Lo is a handheld Phosphine monitor for monitoring phosphine levels outside the fumigated stack/ silo/ ship to check for leaks and to ensure the level of PH3 is less than the TLV. Equipped with an inbuilt air sampling pump and with the ability to measure PH3 up to 20 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.
Fumispec Lo
Fumispec Lo
The Uniphos FumiSpec-Lo is a Single Gas Sulfuryl Fluoride (SO2F2) measurement and alarm monitor designed for leak detection during the fumigation process and in the clearing procedure prior to re-entry. It is equipped with a non-dispersive infrared, dual wavelength sensor to detect low concentrations of Sulfuryl Fluoride. With user-settable data logging features the device can log gas concentration values with date and time.
FumiSpec-Lo has been approved by Douglas Products, USA, the owner of the Vikane® and ProFume® fumigant brand and is one of the few devices to pass rigorous testing by the USEPA (United States Environmental Protection Agency) for accuracy and false negatives at the clearance concentration of 1 ppm.
FumiSpec-Hi
FumiSpec-Hi
Sulfuryl Fluoride is a colorless and odorless gas. It is used as a fumigant in structural and commodity fumigations to control dry wood termites, wood-infesting beetles, and other insects. Like any other fumigant, Inhalation of Sulfuryl Fluoride is very dangerous to human beings and can lead to serious illness or death. Hence, it is very important to monitor the gas concentrations inside the fumigated area space during the entire fumigation period.
The Uniphos FumiSpec-Hi is a fully automatic NDIR based Sulfuryl Fluoride analyzer. Housed in a rugged Pelican storm case it continuously monitors gas concentrations in the fumigated space. It can be used as a single port analyzer or as a multi-port analyzer when connected to an Expansion Pack. It is equipped with an inbuilt sampling pump and comes with User-Settable sampling time for each port. The USB interface present in the FumiSpec-Hi enables data logging and the data storage capacity depends on the memory of the flash drive connected to it.
FumiTrack – Single Port
FumiTrack - Single Port
The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Methyl Bromide during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.
FumiTrack Multiport with Expansion Module
FumiTrack Multiport with Expansion Module
Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Methyl Bromide during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.
FumiTrack Multiport with Expansion Module
FumiTrack Multiport with Expansion Module
Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Phosphine during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.
Hospital Oxygen Monitor
Hospital Oxygen Monitor
The COVID-19 pandemic has affected nearly every country in the world. The rise in infections has overloaded hospitals, resulting in the use of huge quantities of Oxygen in COVID wards and especially ICU’s. The recent spate of fire related accidents in hospitals across India can mostly be traced to the leakage of Oxygen. Most people, including hospital administrators may not be aware that Oxygen, in higher concentrations can present a major fire hazard. Hence, it is imperative that oxygen leak detectors are installed in ICU’s and wards.
Uniphos understands these needs and is committed to working with hospitals to provide a safe environment to patients and staff. This easy to install, made in India product can be a life saver in these trying time. The oxygen monitor activates an alarm when it detects any oxygen leakage.
MBr Gas Detector Tubes
MBr Gas Detector Tubes
Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.
Detector tubes enable the user to easily make spot measurements of Methyl Bromide in the fumigated area. MBr Tubes are available in the lower concentration levels of 1 ppm.
We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio.
Membrane Based Sample Handling System
Membrane Based Sample Handling System
Sample Extraction and Conditioning System or Membrane based Sample Conditioning System
“Membrane based sample conditioning system is for dry sample extraction. This is needed where highly soluble and corrosive acidic gases are present in the sample to be extracted. It reduces the dust load and moisture content in the sample to transport it to CEMS without a heated sampling line. This reduces the running cost of the overall system. The system is specially designed for extracting highly corrosive gases like HBr, F2, HF, HCl and Cl2 from the stack. The system can be directly mounted on the stack with the flange connections and is used where the stack temperatures are <100°C and where very low dewpoints are necessary. The power required to run the system and the necessary communication is established from the CEMS through a cable running between them. “
NDIR Stack Gas Analyzer
NDIR Stack Gas Analyzer
All diatomic and polyatomic molecules have one or several vibrational modes which can absorb radiation and give rise to a unique absorption spectrum in the infrared region with several absorption lines. Taking any one of the IR absorption lines of the target gas as its finger print, an instrument can be built for measurement of target gas concentration. Infrared technique is endowed with very high specificity when a right choice of the vibrational frequency of the target molecule is made. This technique is cost effective and reliable for measurement of gas concentration in parts per million range.
The Uniphos NDIR Stack Gas Analyzer are endowed with specificity and have adequate sensitivity for the detection of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks. The in-built powerful pump enables the analyzer to draw the sample from stack. Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Remote calibration. This PLC based analyser incorporates all desired features which makes it user-friendly and fail safe.
OPX Head (Open Path Transceiver)
OPX Head (Open Path Transceiver)
The GasFinder3-OP is a field deployable Open-Path Tunable Diode Laser (OP-TDL) based gas analyzer system that is primarily used for:
- Leak Detection
- Ambient Monitoring
This technology is also most commonly referred to as Open Path Gas Detection (OPGD) or Line of Sight (LOS).
This particular technology is ideal for detecting or monitoring for a number of different Toxic, Combustible, Hazardous, or Greenhouse Gases.
Peltier Based Sample Handling System
Peltier Based Sample Handling System
The Uniphos Peltier Cooled Probe is an advanced sample conditioning system to draw a gas sample from an emissions stack being monitored. Sample extraction and conditioning is an important part of all Continuous Emission Monitoring Systems (CEMS) and includes extracting the sample from the stack and maintaining the dew point of the sample at such a level that there is no condensation at any point until the concentration of the sample is measured. This ensures proper transport and measurement of sample concentrations.
The Peltier Cooled Probe is a unique product which is based on an advanced hot and dry extractive technique where the sample is extracted and conditioned on the stack and transported to the analyzer using a non-heated sampling tube at ambient temperature. It consists of a stack mountable system which includes a heated probe, a short, heated sampling line and a Peltier cooled sample conditioning module, all integrated in a single enclosure. Using a Peltier Cooled Probe reduces the length of the heated sampling line to less than half a meter, bringing down the operating cost many times.
PH3 Dosimeter Tubes
PH3 Gas Detector Tubes
PH3 Gas Detector Tubes
Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.
Detector tubes enable the user to easily make on the spot measurements of Phosphine in the fumigated area. PH3 Tubes are available both in the lower concentration levels of 0.01 ppm, as well as the fumigation concentration levels of 400 to 5000 ppm.
We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio.
Phosphine Detector Strips
Phosphine Detector Strips
Phosphine detector strips alert workers of the presence of PH3 in dangerous levels. The strips change colour from their original yellow to pink when exposed to PH3 gas. The time it takes to change colour can be related to the PH3 gas concentration in the environment. They can be used to check the fumigated area for the presence of PH3 after aeration is complete and to confirm that the area is safe for re-entry. These strips can also be given to workers as badges when they are working in/near fumigated structures.
Portable COD Analyzer with Digester
Portable COD Analyzer with Digester
Chemical Oxygen demand is defined as the amount of oxygen required for the oxidation of all the organic compounds present in the water sample.
The portable, microprocessor based Uniphos COD analyzer operates on the non-dispersive absorption principle to measure COD of waste / effluent water samples. This easy to use battery operated analyzer features an easy to use intuitive interface and has in-built data logging facility as standard. The stored data can either be exported to a computer or printed as a report to a RS-232 printer.
A COD Digester is also provided with the COD analyzer for digestion of the water sample mixed with reagents. It is a robust instrument capable of accommodating 25 vials at a time. A PID controller in the digester ensures that all the samples are heated precisely to 150oC.
Remote Calibration
Remote Calibration
Remote calibration is the process of remotely triggering either zero or span calibration for a gas analyzer through a web portal. The remote calibration feature in the Uniphos CEMS not only enables access to the analyzer remotely but also assists in performing various activities like zeroing, calibration and validation of the analyzer remotely.
Simple Sampling Probe
Simple Sampling Probe
The Uniphos Simple Sampling probe is tailor made for situations where temperature of the stack is not high, and condensation does not happen while extracting the sample from the stack. The dust filter present in the probe ensures that no dust is passed through the line. User-Settable purging facility enables automatic purging of the probe at pre-defined time intervals.
Single Port FumiTrack
Single Port FumiTrack
The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Hi and / or Lo concentration Phosphine during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.
Stack/Duct Probe
TDLAS Based Gas Analyser
TDLAS Based Gas Analyser
The TDLAS (Tunable Diode Laser Absorption Spectroscopy) technique in combination with WMS (wavelength modulation spectroscopy) is highly sensitive and specific method for detection of gases and is an excellent technique for concentration measurement of gaseous species in scientific as well as industrial applications. Uniphos TDLAS based gas analyzer are exceptionally reliable for trace level detection of atmospheric pollutants like HF, HCl, NH3 etc. Our TDLAS based analyser provides an accurate and real time measurements of these atmospheric pollutants from ppm levels to percentage levels.
TPF Probe
TPF Probe
The emission of pollutants such as CO, CO2, NO, NO2, total NOx, SO2 etc. from stacks are often measured and reported for regulatory compliance purposes on a mass flow rate basis. Mass flow rates are typically calculated and reported in units of lbs or kg per hour and tons per year for these pollutants. The pollutant mass flow rate is a function of the pollutant concentration of the stack gas, the stack size & shape, and the stack gas velocity.
The Uniphos Integrated Temperature, Pressure and Flow Probe is meant for continuous and real time measurement of Temperature, Pressure and velocity of gases in industrial stacks. All the three sensors are integrated on a single flange and can easily be mounted on the stack without any hassle.
Uniphos 500 H16 Multi Channel controller with HMI
Uniphos 500 H16 Multi Channel controller with HMI
The Uniphos 500 H16 is an adaptable, compact MODBUS based controller which can connect up to 8 to 16 numbers of KwikSense Gas Transmitters. It comes in 2 variants – 8 channel and 16 channels. Being a Modbus Scanner, it receives data in MODBUS RTU format from the digital gas transmitters and displays the required output on its screen. Each channel in the controller is user settable for alarms, tags etc. The Uniphos 500 H16 has 3 common potential-free relay contacts to control alarms or any other equipment. The on-board data logging allows easy access to historical data via a USB interface.
Uniphos 500 HA12 Multichannel Controller with HMI
Uniphos 500 HA12 Multichannel Controller with HMI
The Uniphos 500 HA12 is a robust Multi Channel controller which can connect a maximum of 12 nos. of KwikSense Gas Transmitters. Being an analog controller, it accepts 4-20 mA input from the transmitters and displays the required output on its 7’’ TFT touchscreen. Each channel in the controller is user settable for range, resolution, alarms, tags etc. The Uniphos 500 HA12 has 4 common potential-free relay contacts to control alarms or any other equipment. The on-board data logging allows easy access to historical data via a USB interface.
Uniphos 500 R2 Multichannel Rack Mountable Controller
Uniphos 500 R2 Multichannel Rack Mountable Controller
The building block design of the Uniphos 500 R2 provides the flexibility to build a system as small as 2 channels or as large as 16 channels. The Controller, apart from powering the transmitters, also provides a real time digital display of the gas concentrations, a variety of status alarms and the facility to transfer data to a computer.
Uniphos 500 W2 Dual Channel Controller
Uniphos 500 W2 Dual Channel Controller
The 500 W2 Dual Channel Controller is designed to accept analog 4-20 mA signal from one or two transmitters providing centralized monitoring of gas concentrations at one or two locations. The hi-viz LED display aids in providing a clear reading of the gas concentration even from a distance or in low light situations. The two-user settable alarm set points per channel and 3 relay contacts corresponding to each alarm condition provide a plethora of connection options. The additional RS-485 port enables easy data transfer from the controller to a PC.
