Click to enlarge
Previous product
OPTISENS IND 1000
Back to products
Next product
OPTISENS PH 8390
Krohne

OPTISENS PH 8100

Potentiometric pH sensor for chemicals, industrial wastewater and low conductivity media (>2 μS/cm)

  • For use with analytical transmitter
  • Process connection: PG13.5
  • 0…14 pH; Max. +130°C / +266°F; 10 bar / 145 psi
  • Glass sensor with 2 open diaphragms and Pt100 for temperature compensation
SKU: a92f3059ac86 Categories: , , Tag:

Related products

Close

ICON USB

Product discontinued

Transmitter configuration kit for PC configuration of OPTITEMP transmitters

  • With USB interface, connection cables and ConSoft™ software
  • Automatic setting of communication port or interfaces
  • Automatic transmitter identification for quick start
  • Manual and installation guide included
Close

LEM 300

Product discontinued

Level signal conditioner for LS 7200level switches

  • Double level control unit with two galvanically separated circuits
  • Used for power supply and signal processing
  • LEDs display the connected relay
Close

MFC 300

Product discontinued

Coriolis mass flow converter for combination with OPTIMASS Coriolis mass flow sensors

  • Compact, remote field, wall-mounted and rack-mounted housing
  • With extensive diagnostics for advanced requirements
  • 4-wire, 3 x 4…20 mA, HART®, Modbus, FF, Profibus-PA/DP
Close

OPTISWIRL 4070

Product discontinued

Vortex flowmeter for internal energy balancing

  • For liquids, (wet) gases and steam (up to +240°C / +464°F)
  • Integrated pressure and temperature compensation
  • Flange: DN15…300 / ½…12"; wafer version: max. DN100 / 4"
  • 2-wire, 4…20 mA, HART®
Close

TTP 200

Product discontinued

Resistance (RTD) compact sensor for hygienic applications

  • Hygienic thread for hygienic adapters
  • Compact, gasket free housing with built-in transmitter
  • -20…+150°C / -4…+300°F
Close

OPTICHECK DTM

DTM for advanced device verification and commissioning

  • Usable with any FDT frame application from the control room or on site
  • Advanced verification (level 0,1) without process interruption
  • Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)
Close

LS 7200

Product discontinued

Conductive level switch for hygienic liquid applications

  • Point level detection of conductive liquids in the food, beverage and pharmaceutical industry
  • Measuring range: min. 50 mm / 2"
  • -20…+140°C / -4…+284°F; -1…16 barg / -14.5…232 psig
Close

OPTICHECK Master

Handheld for in-depth verification, device commissioning and monitoring

  • On-site performance check and verification (level 0,1,2) without process interruption
  • Convenient commissioning of field devices, e.g. zero calibration
  • Detailed reports for proof test documentation of safety loops acc. to IEC 61508/61511, and for quality management systems (ISO 9001)