Top lining: Wadded polyester polar fleece. Bottom lining: Wadded polyester Taffeta.
Construction / Civil Engineering
Second Work / Craftman
Services / Logistics
Parka with no metallic part
REGULATION (EU) 2016/425
EN ISO 13688:2013 General requirements for protective clothing.
This standard specifies general performance requirements for ergonomics, innocuousness, size designation, durability, ageing, compatibility and marking of protective clothing and the information to be supplied by the manufacturer with the protective clothing.
EN14058:2017 Protective clothing – Garments for protection against cool environments.
|3||Thermal resistance of garment Class (1 to 3)|
|3||Air permeability Class (1 to 3)|
|0,199 m². K/W||Resultant effective thermal insulation measured on a mobile model|
|WP||Class of resistance to water penetration|
These garments are for use in moderate low temperatures (-5°C and over) to protect against local body cooling and are not only for outdoor use such as in the construction industry, but may also be used for indoor activities, such as in the food processing industry.
These garments are not always necessarily made of air impermeable or watertight materials.
Therefore, in this European standard, these requirements are optional.
X: Class of heal resistance, Rct
X: Class of air permeability, AP
X: /cler of the garment (Optional)
X: Class of resistance to water peetration
EN343:2003 A1:2007 Protective garment against rain exposures
|3||Resistance of the Penetration of water (1 to 3)|
|1*||Evaporative resistance (1 to 3)|
X: Resistance to water penetration
X: Water vapour resistance, Ret
• THERMAL RESISTANCE (Rct) IN M².K/W :
Measurement of the thermal insulation provided.
Divided into 4 classes (from 1 to 4) from the least insulating to the most insulating. The higher the value, the greater the thermal insulation.
• WATER VAPOUR RESISTANCE (Ret) IN (M².
Measures the evaporative resistance, i.e. the product’s obstacle to the passage of water vapour, or the barrier it offers to evaporation of transpiration on the surface of the skin. The higher a product’s water vapour resistance, the greater this product’s barrier to the passage of water vapour: A breathing product has a low water vapour resistance. Divided into 3 classes (from 1 to 3) from the least breathable to the most breathable.
• AIR PERMEABILITY (AP) IN mm/s :
Determines the complex’s permeability to air.
Divided into 3 classes (from 1 to 3) from the least airtight to the most airtight.
• RESISTANCE TO WATER PENETRATION (WP) IN PASCAL:
Measurement of the outer material and seams’ resistance to water penetration under a water pressure of (980+/-50) Pa/min.
Divided into 3 levels (1 to 3) from the least impermeable to the most impermeable.
• RESULTANT EFFECTIVE THERMAL INSULATION:
Measured on moving dummy (/cler).
The thermal insulation coefficient, expressed in m2.
K/W, is used to determine the optimum usage temperature of the garment in relation to the individual’s activity and his exposure time.
Thermal insulation is measured with undergarments of type :
– (B) for ensembles (Undershirt with long sleeves, long underpants, socks, bootee + thermojacket, thermopants, knitted gloves, balaclava).
– (R) for garments (Undershirt with long sleeves, long underpants, socks, bootees, jacket, trousers, shirt, knitted gloves, balaclava).
– (C) provided by the manufacturer.