- monitoring of explosive mixtures and CO2
- recommended for frequent occurrence of explosive gases
- compatible with: X-am 5600 / 7000 / 8000
- measuring range: lower explosion limit up to 100 vol.%, for CO2 0 – 5 vol.%
The long service life of this type of sensor (anticipated length of use ca. 8 years) as well as its reduced drift and 12-month calibration interval result in low operational costs.
The infrared sensor technology distinguishes itself by its high level of accuracy. Combined with the imperviousness to sensor poisons, they enable the detection of gases and vapours in a wide range of application areas.
Measuring explosive gases and vapours in environments with hydrogen sulphide and silicones, as well as in inert atmospheres, has no impact on the performance of this sensor.
Depending on the application, it is necessary to measure explosive gases and monitor carbon dioxide concentrations simultaneously, e.g. in the sewage sector. For this, only one sensor is needed – the Dual IR-Ex/CO2 sensor fulfils both measurement tasks. This increases your flexibility when configuring the gas warning device.
The sensor set-up, selection of detectors and type of gas ingress are just a few of the factors that have a direct influence on the measuring performance of an IR sensor. Developing the sensors ourselves gives Dräger the opportunity to optimise these parameters, so they fulfil the requirements of various applications, e.g. personal monitoring, clearance measurements and leak detection.
The infrared Ex sensors can be used for the most diverse measurement tasks: in the range of the lower explosive limit and also for measurements up to 100 vol. %. The IR measuring method can also be used for carbon dioxide. Furthermore, we offer you a dual sensor for simultaneously measuring explosive gases in the range of the LEL or rather up to 100 vol. % and carbon dioxide up to 100 vol.%.