Construction / Civil Engineering
Second Work / Craftman
Services / Logistics
REGULATION (EU) 2016/425
EN365 : 2004 Personal protective equipment against falls from a height – General requirements for the instructions for use, maintenance, periodic examination, repair, marking and packaging.
Instructions for periodic inspections shall include inter alia:
– A recommendation for the frequency of periodic inspections, taking into account factors such as regulation, the type of equipment, frequency of use, and environmental conditions. This recommendation shall include a clause stating that the periodic inspection should be conducted at least once every twelve months;
– A warning to emphasise that periodic inspections should be only carried out by a competent person in strict compliance with the manufacturer periodic inspection procedures.
VISUAL INSPECTION FOR:
Harnesses, belts, lanyards, ropes, energy absorbers, self rectractable devices that cannot be dismantled (e.g. AN102), connectors, our kit components (except ELARA270), temporary anchors (tripod, LV201…)
MECHANICAL INSPECTION FOR:
Self retractable devices that can be dismantled, rescue equipment (e.g. TC2013).
EN355 : 2002 Personal fall protection equipment – Energy absorbers.
WARNING: If we associate a lanyard energy absorber, the total length of the entire device must not exceed 2m.
Specific qualifying conformances
EN363 : 2018 Personal fall protection equipment – Personal fall protection systems
EN364 : 1992 Personal protective equipment against falls from a height : Test method