Showing 13–24 of 54 results

FumiSpec-Hi

FumiSpec-Hi

Sulfuryl Fluoride is a colorless and odorless gas. It is used as a fumigant in structural and commodity fumigations to control dry wood termites, wood-infesting beetles, and other insects. Like any other fumigant, Inhalation of Sulfuryl Fluoride is very dangerous to human beings and can lead to serious illness or death.  Hence, it is very important to monitor the gas concentrations inside the fumigated area space during the entire fumigation period.  

The Uniphos FumiSpec-Hi is a fully automatic NDIR based Sulfuryl Fluoride analyzer. Housed in a rugged Pelican storm case it continuously monitors gas concentrations in the fumigated space. It can be used as a single port analyzer or as a multi-port analyzer when connected to an Expansion Pack. It is equipped with an inbuilt sampling pump and comes with User-Settable sampling time for each port. The USB interface present in the FumiSpec-Hi enables data logging and the data storage capacity depends on the memory of the flash drive connected to it. 

FumiTrack – Single Port

FumiTrack - Single Port

TheUniphosSingle PortFumiTrackdelivers unmatched performancefor the detection and continuous monitoring of Methyl Bromide during Fumigation.The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing fromupto100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the usertoremotelymonitor gas concentrations of the fumigantand ensure that they are at the right levels at all times during the entire fumigation process. 

FumiTrack Multiport with Expansion Module

FumiTrack Multiport with Expansion Module

Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Methyl Bromide during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports.  Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.

FumiTrack Multiport with Expansion Module

FumiTrack Multiport with Expansion Module

Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Phosphine during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports.  Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.

Hospital Oxygen Monitor

Hospital Oxygen Monitor

The COVID-19 pandemic has affected nearly every country in the world. The rise in infections has overloaded hospitals, resulting in the use of huge quantities of Oxygen in COVID wards and especially ICU’s. The recent spate of fire related accidents in hospitals across India can mostly be traced to the leakage of Oxygen. Most people, including hospital administrators may not be aware that Oxygen, in higher concentrations can present a major fire hazard. Hence, it is imperative that oxygen leak detectors are installed in ICU’s and wards.

Uniphos understands these needs and is committed to working with hospitals to provide a safe environment to patients and staff. This easy to install, made in India product can be a life saver in these trying time. The oxygen monitor activates an alarm when it detects any oxygen leakage.

MBr Gas Detector Tubes

MBr Gas Detector Tubes

Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.  

Detector tubes enable the user to easily make spot measurements of Methyl Bromide in the fumigated area. MBr Tubes are available in the lower concentration levels of 1 ppm. 

We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio. 

Membrane Based Sample Handling System

Membrane Based Sample Handling System

Sample Extraction and Conditioning System or Membrane based Sample Conditioning System 

“Membrane based sample conditioning system is for dry sample extraction. This is needed where highly soluble and corrosive acidic gases are present in the sample to be extracted. It reduces the dust load and moisture content in the sample to transport it to CEMS without a heated sampling line. This reduces the running cost of the overall system. The system is specially designed for extracting highly corrosive gases like HBr, F2, HF, HCl and Cl2 from the stack. The system can be directly mounted on the stack with the flange connections and is used where the stack temperatures are <100°C and where very low dewpoints are necessary. The power required to run the system and the necessary communication is established from the CEMS through a cable running between them. “ 

NDIR Stack Gas Analyzer

NDIR Stack Gas Analyzer

All diatomic and polyatomic molecules have one or several vibrational modes which can absorb radiation and give rise to a unique absorption spectrum in the infrared region with several absorption lines. Taking any one of the IR absorption lines of the target gas as its finger print, an instrument can be built for measurement of target gas concentration. Infrared technique is endowed with very high specificity when a right choice of the vibrational frequency of the target molecule is madeThis technique is cost effective and reliable for measurement of gas concentration in parts per million range. 

The Uniphos NDIR Stack Gas Analyzer are endowed with specificity and have adequate sensitivity for the detection of gases like SO2, NOx, CO, CO2 and CH4 in industrial stacks. The in-built powerful pump enables the analyzer to draw the sample from stack. Analyzer is equipped with the latest embedded and IOT technologies which enables the user to perform Remote calibration. This PLC based analyser incorporates all desired features which makes it user-friendly and fail safe.

OPX Head (Open Path Transceiver)

OPX Head (Open Path Transceiver)

The GasFinder3-OP is a field deployable Open-Path Tunable Diode Laser (OP-TDL) based gas analyzer system that is primarily used for: 

  • Leak Detection  
  • Ambient Monitoring  

This technology is also most commonly referred to as Open Path Gas Detection (OPGD) or Line of Sight (LOS). 

This particular technology is ideal for detecting or monitoring for a number of different Toxic, Combustible, Hazardous, or Greenhouse Gases. 

For more information click here.

Peltier Based Sample Handling System

Peltier Based Sample Handling System

The Uniphos Peltier Cooled Probe is an advanced sample conditioning system to draw a gas sample from an emissions stack being monitored. Sample extraction and conditioning is an important part of all Continuous Emission Monitoring Systems (CEMS) and includes extracting the sample from the stack and maintaining the dew point of the sample at such a level that there is no condensation at any point until the concentration of the sample is measured. This ensures proper transport and measurement of sample concentrations.  

The Peltier Cooled Probe is a unique product which is based on an advanced hot and dry extractive technique where the sample is extracted and conditioned on the stack and transported to the analyzer using a non-heated sampling tube at ambient temperature. It consists of a stack mountable system which includes a heated probe, a short, heated sampling line and a Peltier cooled sample conditioning module, all integrated in a single enclosure. Using a Peltier Cooled Probe reduces the length of the heated sampling line to less than half a meter, bringing down the operating cost many times. 

PH3 Dosimeter Tubes

PH3 Dosimeter Tubes

Uniphos Dosimeter tube is a device, very similar to gas detector tubes, that provides the Concentration-Time product (Dose) of phosphine during the entire fumigation durationBut, unlike normal detector tubes, phosphine enters the dosimeter tube by natural diffusion.  

PH3 Gas Detector Tubes

PH3 Gas Detector Tubes

Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.  

Detector tubes enable the user to easily make on the spot measurements of Phosphine in the fumigated area. PH3 Tubes are available both in the lower concentration levels of 0.01 ppm, as well as the fumigation concentration levels of 400 to 5000 ppm. 

We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio.