Testifire Replacement Carbon Monoxide Capsules 3 or 6 Pack
These TC3 replacement carbon monoxide (CO) capsules are for use with Testifire's 2000 series of remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a crucial part of the Testifire 2000 series system. Replacement smoke capsules can also be purchased for this system.
Designed for Testifire equipment
Choice of 3 pack or 6 pack
Fantastic alternative to stored pressure canisters
Generates smoke as and when needed
Colour coded green for simple identification
Individual capsules weigh just 45g
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height.
Cable length: 5m/16ft
Designed to help power Solo mains heat detector testers
Needed for applications where multiple telescopic or extension poles are used
Allows testing of heat detectors mounted at greater height
Testifire 6002 6m Smoke/Heat Detector Testing Kit
The Testifire 6002 smoke/heat detector testing kit offers an upgraded range of 6 metres which allows climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates an amazing time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6002 kit offers massive long term time and cost saving benefits for those carrying out "functional" testing on devices that are hard to reach by other means. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag as standard.
Kit includes:
Testifire 1000 smoke/heat detector tester
TS3 smoke capsule
Two solo battery batons
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Solo 100 & 108 – Telescopic Access Poles
An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use.
Suitable for use with both Solo and Testifire branded products
Required for access to detectors out of normal reach
Lightweight non-conductive glass fibre construction
Optimum strength to weight ratio ensures minimum possible whip or bend at height
Easy to use locking mechanism
Available in two lengths:
Solo 108 - 2.2m telescopic pole (4m working height)
Solo 100 - 4.5m telescopic pole (6m working height)
Designed for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Regulations 2005
Allows "functional" testing to be carried out
Solo 461 – Cordless Heat Detector Tester Kit
The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation.
Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor
UL and ULC listed
No trailing cables - fully complies with Health and Safety at Work regulations
Battery operated - supplied with two battery batons
Provides rapid detector activation
Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre)
Visual low battery indicator
Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter)
Quiet fan motor for discreet operation
Lightweight and easy to use
Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately)
Suitable for use at angles
1 year manufacturer's warranty
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out.
Designed for use only with Solo 365 equipment
Supplied in packs of 3 cartridges
Provides on-demand smoke for accurate testing and minimal wastage
Non-pressurised for safe storage and transportation
Small and lightweight, can easily be carried in pockets
Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers
Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Testifire 9002 9m Smoke/Heat Detector Testing Kit
The Testifire 9002 smoke/heat detector testing kit offers the highest available reach at 9 metres. This range allows for climb-free access to detectors on even the highest of ceilings. Removing the need for extensive scaffolding creates an enormous time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 9002 kit offers massive long term time and cost saving benefits. The kit is provided with one telescopic access pole with a reach of up to 4.5m, and three individual fibreglass extension poles to allow complete customisation of the length. This is the ultimate kit for professional alarm system engineers, and is supplied complete with a universal detector removal tool and a protective storage/carry bag at no extra cost.
Kit includes:
Testifire 1000 smoke/heat detector tester
Two battery batons
TS3 smoke capsule
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 101-001 fibreglass 1.13m extension pole (x3)
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
User friendly programmable interface with colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
No pressurised containers needed - stimuli created on demand
Solo 330 – Smoke Dispenser
The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole.
Allows "functional" smoke detector testing to be carried out
Durable construction and lightweight
UL listed
Universal: suitable for detectors up to 100mm/4" in diameter
Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste
Transparent test cup enables clear view of the detector LED while testing
Suitable for use on suspended ceiling tiles
Swing frame allows for use at/from angles
Designed for use with Solo smoke and Solo CO aerosols (not supplied)
Used with the Solo telescopic access poles: enables safe testing at heights
Solo 908 – 4m Test Kit with Solo 365
The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit.
Slimline design allows easy access to awkwardly positioned detectors
Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres)
Automatic LED torch for testing in dark areas
Compatible with standard Solo poles including the 100 and 101
Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems
Key components available as user-replaceable spares – no manufacturer service required!
ES3 Smoke Cartridge
Field Service Pack (smoke generator, battery, cup & membrane)
Spare Battery Pack
Smoke Generator
Cup and Membrane
Universal Charging Kit
Smaller, non-pressurised smoke cartridges for ease of storage and transport
Lighter than standard Solo 330 tester with aerosols
Automatically turns off after 10 minutes of inactivity to extend battery life
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit
The Testifire 6202 smoke/heat/CO detector testing system offers an extended reach of 6 metres, greatly improving it's range compared to the standard version. The kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates amazing time saving benefits for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6202 kit offers a versatile system that offers long term time and cost saving benefits. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag, making this the complete system.
Kit includes:
Testifire 2000 smoke/heat/CO detector tester
TS3 smoke capsule
TC3 carbon monoxide capsule
Two solo battery batons
Solo 727 fast charger
Solo universal detector removal tool
Solo 100-001 fibreglass 4.5m telescopic access pole
Solo 601-001 protective carrying/storage bag
Automated infra-red test initiation
User friendly programmable interface
Multiple test modes and test cycles
Highly customisable test sequences including simultaneous testing
Colour coded LED user feedback
Automatic power-off feature after 5 minutes of inactivity to extend battery life
Allows trained personnel to carry out "functional" testing on smoke, heat and CO sensors
No pressurised containers needed- stimuli created on demand for smoke and CO sensors
Solo 365 Replacement Smoke Generator
This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason.
Designed for use only with Solo 365 equipment
Works with the ES3 Smoke Cartridge
Automatically creates smoke when the Solo 365 cup is over a detector head
On-demand, 5-second smoke cycles prevent wastage and detector contamination
Easy to install, field-replaceable design – no manufacturer service required
Test more detectors in less time by carrying spares instead of going back to the van