Cut protection glove
ECOGRIP MITAR LeMan Cut 5
ECOGRIP MITAR HIBERNIA CUT 5
The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.
The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”.
ECOMASTER PLUS 3
The cut protection glove ECOMASTER PLUS 3 by W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>
The very fine glove one cut sten Micro-HPPE fiber with polyamide is certified according to EN 388: 2016 (4 X 4 1 B) and has a light cut protection (level B) according to EN 13997.
The ECOMASTER® ½-immersion made of eco-polymer is suitable very good for handling dry and wet parts. The coating is liquid-repellent and very breathable.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
BÜFFEL STEEL 1 LONG
The cut protection glove BÜFFEL STEEL 1 LONG by W + R INDUSTRY is highly cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 ( 4 X 4 4 F) and has a very high cut protection (level F) according to EN 13997. In addition, the glove is certified according to EN 407: 2004 (4 1 3 2 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005.
The palm of the BÜFFEL STEEL 1 LONG is made of turned grain leather, the backhand is made of blue split leather. The lining on the back of the hand is made of cotton, the palm of the palm is made of Kevlar® tricot. The solid cuff is made of split leather with a special stabilizing seam and also has a pulse protection.
< / p>
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
TIGER LONG
The cut protection glove TIGER LONG by W + R INDUSTRY is highly cut-resistant and is comfortable to wear thanks to its hand-adapted cut.
The glove is certified according to EN 388: 2016 (4 5 4 3).
The palm and backhand of the TIGER LONG is made of red split leather. The lining is made of a high-cut resistant textile. The long cuff is made of split leather and also has a pulse protection.
ECOGRIP MITAR
The cut protection glove MITAR by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.
The fine glove made of HPPE and Fiber optic i st certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
VENICUT43
ECOMASTER PLUS 5
The cut protection glove ECOMASTER PLUS 5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. </ span>
The very fine glove from a r cut-resistant micro HPPE fiber with the finest poly / glass. is certified according to EN 388: 2016 (4 X 4 2 C) and has a medium cut protection (level C) according to EN 13997.
The ECOMASTER® ½-immersion made of eco-polymer is very suitable for handling dry and wet parts. The coating is liquid-repellent and very breathable.
The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".
< / p>
BÜFFEL STEEL 2 LONG
The cut protection glove BÜFFEL STEEL 2 LONG by W + R INDUSTRY is highly cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.
The glove is certified according to EN 388: 2016 ( 4 X 4 4 F) and has a very high cut protection (level F) according to EN 13997. In addition, the glove is certified according to EN 407: 2004 (4 1 3 2 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005.
The palm of the BÜFFEL STEEL 2 LONG is made of turned grain leather and the backhand is made of blue split leather. The lining on the back of the hand and the palm is made of a Kevlar® tricot. The fixed cuff is made of split leather with a special stabilizing seam and also has a pulse protection.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.
VENICUT F XTREM CUT – VENICUTF01
ECOGRIP MITAR D
The cut protection glove MITAR D by W + R INDUSTRY is highly cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is very comfortable to wear.
The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 D) and has a high cut protection (level D) according to EN 13997.
The dots made of black nitrile are very suitable for handling sensitive and small parts.
The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".
