Showing 1–12 of 58 results

ECOGRIP MITAR LeMan Cut 5

The cut protection glove MITAR LeMan CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high en cut protection (Level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.

The ECOGRIP® ½ immersion made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-repellent and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.

The glove was made by Dermatest® on his Skin tolerance tested and received the grade "very good".

ECOGRIP MITAR HIBERNIA CUT 5

The cut protection glove MITAR Hibernia CUT5 by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE and fiberglass is certified according to EN 388: 2016 (4 X 4 2 DP), has a high cut protection (level D) according to EN 13997 and, thanks to its tested TPR protectors on the back of the hand and fingers, offers impact protection according to EN 13594: 2015 for the knuckles.

The ECOGRIP® ¾ two-layer dipping made of sanded nitrile is very suitable for handling wet and dry parts. The coating is oil-resistant, liquid-tight and breathable. As additional protection against injuries in the crook of the thumb, the glove has a reinforcement between the index finger and thumb.

The glove was made by Dermatest® on his Tested for skin tolerance and received the grade “very good”. 

ADLER 2

The cut protection glove ADLER 2 by W + R INDUSTRY is cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.

The glove is certified according to EN 388: 2016 (3 3 3 3)

The palm of the ADLER 2 is made of grain leather, the backhand made of a cotton fabric. The lining on the back of the hand and palm is made of a Kevlar® jersey (complete, including cuff). 

BLACK HAWK

The cut protection glove BLACK HAWK by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.

The glove is certified according to EN 388: 2016 (3 3 3 4 X).

The palm of the BLACK HAWK is made of turned goatskin, the backhand made of goat grain leather. The lining on the back of the hand is made of cotton interlock, the inside of the hand is made of Kevlar®. The short cuff is made of turned goatskin.

BLUETEC DYNAFORCE C

The cut protection glove Dynaforce C < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine one Glove made of HPPE yarn with technical basalt fiber is certified according to DIN EN 388: 2016 (4 X 3 3 C) and has a medium cut protection (level C) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce C is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.

    < li class = "cs64D34F3">

BLUETEC DYNAFORCE D

The cut protection glove Dynaforce D < span class = "cs1B16EEB5"> from W + R INDUSTRY is cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knit and is extremely comfortable to wear.

The high one fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 3 D) and has a high level of cut protection (level D) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce D is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.

BLUETEC DYNAFORCE F

The cut protection glove Dynaforce F < span class = "cs1B16EEB5"> from W + R INDUSTRY is extremely cut-resistant, adapts perfectly to the hand thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine glove made of HPPE yarn with technical tungsten is certified according to DIN EN 388: 2016 (4 X 4 4 F) and has the highest cut protection (level F) according to EN 13997.

The ½ immersion made of silicone-free polyurethane (PU) is very suitable for handling oily parts. The coating is oil-resistant, liquid-tight and breathable.

The Dynaforce F is produced using our Bluetec® process. Substances that are soluble in water and sweat are washed out during the production process. This also reduces the DMF content to below 10 ppm.

The glove is also washable. With our cleaning service W + R GLOVE CARE save costs and improve your ecological balance.

BLUETEC GREEN POWER S

The cut protection glove GREEN POWER + TWILLSTULPE by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear.

The fine one Glove made of e A Tekora® high-tech fiber with a poly / glass core is certified according to EN 388: 2016 (4 5 4 2). The ½ immersion made of polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids. The glove also has a cotton cuff. 

The glove was tested for its skin tolerance by Dermatest® and received the grade "very good".

< / p>

The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.

BLUETEC GREEN POWER+

The cut protection glove GREEN POWER + by W + R INDUSTRY is highly cut-resistant, fits the hand perfectly thanks to its seamless 3D knitted fabric and is extremely comfortable to wear. < / p>

The fine glove from one Tekora® Hight echfaser with poly / glass core is certified according to EN 388: 2016 (4 5 4 2). The ½ immersion made of polyurethane is very suitable for handling oiled parts. The coating is oil-resistant and impermeable to liquids.

< span class = "cs1B16EEB5"> The glove was tested by Dermatest® for its skin tolerance and received the grade "very good".

The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.

BÜFFEL 7

The cut protection glove BÜFFEL 7 by W + R INDUSTRY is cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.

The palm of the BÜFFEL 7 is made of tactile nappa leather, the backhand of blue Sp old leather. The lining in the palm is made of cut-resistant Kevlar®. The long cuff is made of split leather and also has a pulse protection.

BÜFFEL STEEL 1 LONG

The cut protection glove BÜFFEL STEEL 1 LONG by W + R INDUSTRY is highly cut-resistant and offers good wearing comfort thanks to its hand-adapted cut.

The glove is certified according to EN 388: 2016 ( 4 X 4 4 F) and has a very high cut protection (level F) according to EN 13997. In addition, the glove is certified according to EN 407: 2004 (4 1 3 2 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005.

The palm of the BÜFFEL STEEL 1 LONG is made of turned grain leather, the backhand is made of blue split leather. The lining on the back of the hand is made of cotton, the palm of the palm is made of Kevlar® tricot. The solid cuff is made of split leather with a special stabilizing seam and also has a pulse protection.

< / p>

The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".

The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.

BÜFFEL STEEL 2 LONG

The cut protection glove BÜFFEL STEEL 2 LONG by W + R INDUSTRY is highly cut-resistant and, thanks to its hand-adapted shape, offers good wearing comfort.

The glove is certified according to EN 388: 2016 ( 4 X 4 4 F) and has a very high cut protection (level F) according to EN 13997. In addition, the glove is certified according to EN 407: 2004 (4 1 3 2 4 X) and can be used for heavy welding work (type A) according to DIN EN 12477: 2005.

The palm of the BÜFFEL STEEL 2 LONG is made of turned grain leather and the backhand is made of blue split leather. The lining on the back of the hand and the palm is made of a Kevlar® tricot. The fixed cuff is made of split leather with a special stabilizing seam and also has a pulse protection.

The glove was tested by Dermatest® for its skin compatibility and received the grade "very good".

The glove is also washable. With our cleaning service W + R GLOVE CARE you save costs and improve your ecological balance.