Showing 1–12 of 29 results

VGAS Calibration Gases

VGAS Inc., has the expertise and experience to provide stable low PPM & PPB concentration calibration mixtures of reactive, toxic, hydrocarbon, and atmospheric gases in various size disposable cylinders.

Dräger X-dock® 5300/6300/6600

Test and calibration station for portable gas detection instruments

Dräger E-Cal

Check, control and calibration of portable gas measuring devices at any time: Dräger E-Cal, the automatic test and calibration system is made for it.

Calibration gas and accessories

Calibration of equipment will ensure safe operation and functionality of equipment and will also meet with the applicable regulations and codes of practice. Various calibration gas options are easily available.

Trigger Fixed Flow Regulator

The trigger regulator is designed to provide aerosol capability, this regulator can be used with 34L and 58L aluminium cylinders. The trigger can be used for dispensing gas at flow rate of 0.5L/Mn. And can be flipped upwards into on position for continuous flow of gas.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
6mm Straight tube
Material: 
Brass
Warranty: 
1 year

Standard Demand Flow Regulator

Demand Flow Regulator is used mainly for docking stations and regulator is set to open only under vacuum of 3-inch water column which gives a flow rate of 0-3 L/Mn. The regulator comes in both standard C10 connection and High-Pressure NPT connection.
SPECIFICATIONS
Inlet Pressure: 
70 bar or 200 bar
Outlet Flow: 
0-3 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M or 1/4“ NPT F for the high Pressure
Outlet Connection: 
Barbed Outlet
Material: 
Brass or Stainless Steel
Warranty: 
1 year

Single Stage Regulator

Single-stage gas pressure regulators reduce cylinder pressure to delivery or outlet pressure in a single or one step. Its one of the safest means to reduce pressure and has large supply pressure effect. The Regulator comes with gauge upto 315 Bar and bottom connection made of stainless steel.
SPECIFICATIONS
Inlet Pressure: 
150 bar max
Outlet Pressure: 
0-2 bar max
Outlet Flow: 
15 L/Mn
Inlet Connection: 
1/4” NPT Female- Adaptor to C10 valve
Outlet Connection: 
¼” NPT female or 1/8” NPT Female
Regulator Inlet Port: 
¼” NPT Female – Adaptor to c10 valve or 1/8” NPT Female
Material: 
Stainless Steel and Aluminium
Warranty: 
1 year

Septum Flow Valve

The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe. This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection: 
Septum Outlet
Material: 
Brass
Warranty: 
1 year

S Flow Regulator

An Economical Alternative to the fixed flow regulator and comes with adjustable flow rates. The S-Flow regulator comes with ON/OFF knob and a rotameter to indicate flow rates.
SPECIFICATIONS
Inlet Pressure: 
70 bar or 35 bar
Outlet Flow: 
0.25L/Mn, 0.5 L/Mn, 0.75L/Mn, 1.0 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection: 
Barbed Outlet
Material: 
Brass
Warranty: 
1 year

Rupture Disk C10 Valve

This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder. The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
5/18” UNF-F
Material: 
Stainless Steel
Warranty: 
1 year

Push Lever Fixed Flow Regulator

The trigger regulator comes with lever which can be operated in two ways, when the lever is pushed it works as an ON/OFF switch whereas when the lever is pulled upwards the regulator gives continuous flow of gas.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn & 1.0 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
Barbed Outlet
Material: 
Brass & Stainless Steel
Warranty: 
1 year

Push Button Fixed Flow Regulator

Push Button Regulator comes with a ON/OFF button on its top as preventive measure for accidental loss of gas and is mainly used for Bump Testing.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0.5 L/Mn & 1.0 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
Taper Shank Adaptable to Polyurethane Tube
Material: 
Brass & Stainless Steel
Warranty: 
1 year