The Uniphos KwikSense Lite Transmitter offers users a high quality, low-cost solution to their gas monitoring needs. It can be installed in potentially explosive atmospheres, as the transmitter is housed in an explosion-proof (“Exd” Certified) enclosure.
KwikSense Lite comes with a pre-calibrated sensor for easy installation. It provides the user with industry-leading plug-n-play sensor technology for the gas of choice. This allows rapid field replacement of the sensor with a new pre-calibrated one, eliminating the need for field calibration. It comes with an Industry Standard 4-20 mA analog output.
The KwikSense Lite has numerous international certifications including ATEX & IECEx
The COVID-19 pandemic has affected nearly every country in the world. The rise in infections has overloaded hospitals, resulting in the use of huge quantities of Oxygen in COVID wards and especially ICU’s. The recent spate of fire related accidents in hospitals across India can mostly be traced to the leakage of Oxygen. Most people, including hospital administrators may not be aware that Oxygen, in higher concentrations can present a major fire hazard. Hence, it is imperative that oxygen leak detectors are installed in ICU’s and wards.
Uniphos understands these needs and is committed to working with hospitals to provide a safe environment to patients and staff. This easy to install, made in India product can be a life saver in these trying time. The oxygen monitor activates an alarm when it detects any oxygen leakage.
The Uniphos KwikSense RD enables users to duplicate the transmitter display at a second remote location. This is particularly useful if the gas transmitter is located in a location where its display is difficult to view or in case a second display is required. It can act as a controller and/or as a bridge between the detector and controller.
It comes with an industry-standard RS-485 MODBUS-RTU and 4-20 mA output to connect the controller as well as the detector. All settings can be configured using the supplied non-intrusive magnetic wand.
The KwikSense RD has numerous international certifications including ATEX, IECEx, SIL2, and INMETRO.
The Uniphos KwikSense Smart Digital Gas Transmitter is a universal gas transmitter capable of detecting a wide range of toxic and flammable gases that may be present in industrial process. Smart Sensor in the transmitter enable us to swap them between any Sensor Technology. It is a field mounted device which is compatible with all Uniphos Smart Gas Sensors and is suitable for the detection and continuous monitoring of hazardous gas leaks in your working site.
Our groundbreaking Smart Sensor Technology, with Transportable Calibration, allows quick sensor changes with pre-calibrated gas sensors, saving time and money. Also, the non-intrusive calibration allows customer to perform calibration in the hazardous areas without opening the transmitters, thus reducing the downtime of calibration.
It comes with an RS-485 MODBUS-RTU digital output signal that can be connected to any suitable control system viz. Uniphos controller, DCS, PLC, etc. It also provides an industry standard 4-20 mA analog output. HART protocol can also be provided in the transmitter.
The KwikSense Smart Digital Gas Transmitter has numerous international certifications including ATEX, IECEx, MED and SIL2.
The GasFinder3-OP is a field deployable Open-Path Tunable Diode Laser (OP-TDL) based gas analyzer system that is primarily used for:
This technology is also most commonly referred to as Open Path Gas Detection (OPGD) or Line of Sight (LOS).
This particular technology is ideal for detecting or monitoring for a number of different Toxic, Combustible, Hazardous, or Greenhouse Gases.
The Uniphos 500 H16 is an adaptable, compact MODBUS based controller which can connect up to 8 to 16 numbers of KwikSense Gas Transmitters. It comes in 2 variants – 8 channel and 16 channels. Being a Modbus Scanner, it receives data in MODBUS RTU format from the digital gas transmitters and displays the required output on its screen. Each channel in the controller is user settable for alarms, tags etc. The Uniphos 500 H16 has 3 common potential-free relay contacts to control alarms or any other equipment. The on-board data logging allows easy access to historical data via a USB interface.
The Uniphos 500 HA12 is a robust Multi Channel controller which can connect a maximum of 12 nos. of KwikSense Gas Transmitters. Being an analog controller, it accepts 4-20 mA input from the transmitters and displays the required output on its 7’’ TFT touchscreen. Each channel in the controller is user settable for range, resolution, alarms, tags etc. The Uniphos 500 HA12 has 4 common potential-free relay contacts to control alarms or any other equipment. The on-board data logging allows easy access to historical data via a USB interface.
The building block design of the Uniphos 500 R2 provides the flexibility to build a system as small as 2 channels or as large as 16 channels. The Controller, apart from powering the transmitters, also provides a real time digital display of the gas concentrations, a variety of status alarms and the facility to transfer data to a computer.
The 500 W2 Dual Channel Controller is designed to accept analog 4-20 mA signal from one or two transmitters providing centralized monitoring of gas concentrations at one or two locations. The hi-viz LED display aids in providing a clear reading of the gas concentration even from a distance or in low light situations. The two-user settable alarm set points per channel and 3 relay contacts corresponding to each alarm condition provide a plethora of connection options. The additional RS-485 port enables easy data transfer from the controller to a PC.
The Uniphos 500 W4 is a wall mountable, quad channel microprocessor-based controller. The Hi-viz LED display provides a clear reading of the gas concentration even from a distance or in low light situations. The two-user settable alarm set points per channel and 3 relay contacts corresponding to each alarm condition provide a plethora of connection options.
The Uniphos 500 WS eight channel scanner provides an economical way to monitor up to 8 gas transmitters. The Hi-viz LED display provides a clear reading of the gas concentration even from a distance or in low light situations. The two-user settable alarm set points per channel and 3 common relay contacts corresponding to each alarm condition provide a plethora of connection options