C10 DA Valve

The 3/4 x 16 UN C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in stainless steel.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
3/4″ x 16 UN
Outlet Connection: 
5/18″ UNF-F
Material: 
Stainless Steel
Warranty: 
1 year

C10 Valve

The standard C10 valve is used on corrosive and non-corrosive cylinders. The valve is manufactured in brass and stainless steel. It’s available in both types i.e. for refillable and non-refillable cylinders.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
5/18″ UNF-F
Material: 
Brass or stainless steel
Warranty: 
1 year

CGA 165 Valve

This valve is light in weight comes with a ON/OFF knob and a brass CGA 165 outlet connection where a free nut is fitted for coupling.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
1”x14 UNS
Outlet Connection: 
CGA 165
Material: 
Aluminium
Warranty: 
1 year

CGA 600 Valve

The Standard CGA 600 valve is used for 17 Litres and 34 Litres steel cylinders.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
1”x20 UNEF-M
Material: 
Stainless Steel
Warranty: 
1 year

Mini Flow C10 Valve

It is used with the 20 litre mini gas cylinder. Designed with a simple on/off valve the gas flow is regulated through a Rotameter.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Outlet Flow: 
0 to 1 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M or CGA 600 or Aerosol
Outlet Connection: 
Barbed Outlet
Material: 
Brass
Warranty: 
1 year

Pump Flow Valve

An economical alternative to the standard Demand flow regulator. This is to be used with instruments having built in Vacuum pump.
SPECIFICATIONS
Inlet Pressure: 
70 bar
Outlet Flow: 
0 to 3 L/Mn
Inlet Connection: 
C10-5/8” x 18 UNF-M
Outlet Connection: 
Barbed Outlet
Material: 
Brass
Warranty: 
1 year

Rupture Disk C10 Valve

This type of valve acts like a standard C10 valve and comes with a disk which ruptures when the pressure doubles during filling of cylinder. The rupture disk acts as prevention for accidental over-filling of gas into the cylinders.
SPECIFICATIONS
Inlet Pressure: 
90 bar
Inlet Connection: 
1/14” UNS
Outlet Connection: 
5/18” UNF-F
Material: 
Stainless Steel
Warranty: 
1 year

Septum Flow Valve

The Septum Flow Valve is used with gas cylinders for extraction of specific amount of gas. The septum holds the gas once the valve is turned on and once turned off the required amount of gas can be removed with the help of a syringe. This also helps is preventing accidental loss of gas.
SPECIFICATIONS
Inlet Pressure: 
35 bar
Inlet Connection: 
C10-5/8” x 18 UNF-M or Aerosol
Outlet Connection: 
Septum Outlet
Material: 
Brass
Warranty: 
1 year