Showing 1–12 of 16 results

Single Port FumiTrack

Single Port FumiTrack

The Uniphos Single Port FumiTrack delivers unmatched performance for the detection and continuous monitoring of Hi and / or Lo concentration Phosphine during Fumigation. The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing from upto 100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentrations of the fumigant and ensure that they are at the right levels at all times during the entire fumigation process.  

PH3 Gas Detector Tubes

PH3 Gas Detector Tubes

Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.  

Detector tubes enable the user to easily make on the spot measurements of Phosphine in the fumigated area. PH3 Tubes are available both in the lower concentration levels of 0.01 ppm, as well as the fumigation concentration levels of 400 to 5000 ppm. 

We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio. 
 

PH3 Dosimeter Tubes

PH3 Dosimeter Tubes

Uniphos Dosimeter tube is a device, very similar to gas detector tubes, that provides the Concentration-Time product (Dose) of phosphine during the entire fumigation durationBut, unlike normal detector tubes, phosphine enters the dosimeter tube by natural diffusion.  

FumiTrack Multiport with Expansion Module

FumiTrack Multiport with Expansion Module

Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Phosphine during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports.  Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.

MBr KwikAlert

MBr KwikAlert

The Uniphos KwikAlert is a compact single gas, diffusion based personal monitor designed to monitor the work environment for dangerous levels of Methyl Bromide gas. Equipped with a bright and easy to read OLED display, the gas concentration is continuously displayed, and its user settable audio and visual alarms alert the user of dangerous levels of gas. With data logging available as standard, monitoring TWA and STEL limits is a breeze.   

The MBr KwikAlert gas monitor can detect MBr in the range of 0 to 200 ppm, making it an ideal tool to both check for leaks around the fumigation chamber, as well as monitor the environment for dangerous levels of MBr. 

MBr Gas Detector Tubes

MBr Gas Detector Tubes

Gas Detector tubes, also known as colorimetric gas detection tubes, are sealed glass tubes filled with a sensing chemical. When air from inside or outside the fumigated space is drawn through the tube using the appropriate gas sampling pump, the sensing chemical inside changes color and forms a stain. The length of the stain thus formed is proportional to the gas concentration present at the point of sampling and can be easily read from the scale printed on the tube.  

Detector tubes enable the user to easily make spot measurements of Methyl Bromide in the fumigated area. MBr Tubes are available in the lower concentration levels of 1 ppm. 

We offer a choice of both thick and thin tubes (KwikDraw and Uniphos) within our portfolio. 

FumiTrack – Single Port

FumiTrack - Single Port

TheUniphosSingle PortFumiTrackdelivers unmatched performancefor the detection and continuous monitoring of Methyl Bromide during Fumigation.The unit draws gas samples at pre-determined intervals from inside the fumigation chamber / silo / container with a powerful inbuilt air sampling pump capable of drawing fromupto100m of tubing. Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the usertoremotelymonitor gas concentrations of the fumigantand ensure that they are at the right levels at all times during the entire fumigation process. 

FumiTrack Multiport with Expansion Module

FumiTrack Multiport with Expansion Module

Uniphos Multiport FumiTrack is a portable, programmable, fully automatic multi-port gas monitor for the periodic monitoring of Methyl Bromide during Fumigation. Housed in a tough Pelican Storm Case, it provides superior protection in tough environments. The multi-port FumiTrack is capable of periodic measurement from up to 4 ports at user-settable intervals. With the addition of an 8-port expansion pack, monitoring can be expanded from up to 12 ports.  Equipped with the latest embedded and IoT technologies, the inbuilt GSM modem pushes data to the cloud and enables the user to remotely monitor gas concentration levels, with information like Cycle No., Date, Time, Site & Location. Once programmed, the FumiTrack will work automatically, without any human intervention, for the entire fumigation period, enabling the user to remotely monitor the fumigation from anywhere in the world.

FumiSpec-Hi

FumiSpec-Hi

Sulfuryl Fluoride is a colorless and odorless gas. It is used as a fumigant in structural and commodity fumigations to control dry wood termites, wood-infesting beetles, and other insects. Like any other fumigant, Inhalation of Sulfuryl Fluoride is very dangerous to human beings and can lead to serious illness or death.  Hence, it is very important to monitor the gas concentrations inside the fumigated area space during the entire fumigation period.  

The Uniphos FumiSpec-Hi is a fully automatic NDIR based Sulfuryl Fluoride analyzer. Housed in a rugged Pelican storm case it continuously monitors gas concentrations in the fumigated space. It can be used as a single port analyzer or as a multi-port analyzer when connected to an Expansion Pack. It is equipped with an inbuilt sampling pump and comes with User-Settable sampling time for each port. The USB interface present in the FumiSpec-Hi enables data logging and the data storage capacity depends on the memory of the flash drive connected to it. 

FumiSense Pro PH3 – Lo

FumiSense Pro PH3 - Lo

FumiSense Pro-Lo is a handheld Phosphine monitor for monitoring phosphine levels outside the fumigated stack/ silo/ ship to check for leaks and to ensure the level of PH3 is less than the TLV. Equipped with an inbuilt air sampling pump and with the ability to measure PH3 up to 20 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.

FumiSense Pro PH3 – Hi (CO)

FumiSense Pro PH3 - Hi (CO)

FumiSense Pro–Hi is a handheld gas monitor for phosphine concentration measurement when CO is present along with phosphine, like in tobacco fumigation. Equipped with an inbuilt air sampling pump capable of drawing a sample from a distance of 30m and a sensor capable of measuring PH3 up to 2000 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.

FumiSense Pro PH3 – Lo

FumiSense Pro PH3 - Lo

FumiSense Pro-Lo is a handheld Phosphine monitor for monitoring phosphine levels outside the fumigated stack/ silo/ ship to check for leaks and to ensure the level of PH3 is less than the TLV. Equipped with an inbuilt air sampling pump and with the ability to measure PH3 up to 20 ppm, it is the perfect tool for this application. The backlit OLED display enables the user to read the instrument display even in the dark. With user settable datalogging features, the device logs gas concentration values with date, time and location.