Showing all 7 results

Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs

Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required. Allows the access of smoke detectors out of normal reach Non-conductive glass fibre extension and telescopic access poles Smoke dispenser introduces simulated smoke to the detector Pack includes: Solo A10 smoke detector tester (150ml canister) Solo 330 smoke dispenser Telescopic access or extension pole (three lengths available) Three access poles to choose from: Solo 101 - 1.13m extension pole (2.5m working height) Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Suitable for detectors up to 100mm/4" in diameter Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Solo 330 – Smoke Dispenser

The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights

Solo 332 – Large Smoke Dispenser

Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height. Allows "functional" smoke detector testing to be carried out UL listed Robust and lightweight Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery Clear cup ensures 360 degree view of the detector Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not included) Can be used with the Solo telescopic and extension access poles for safe testing at heights Suitable for use when testing domestic smoke and CO alarms

Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)

The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out. Designed for use only with Solo 365 equipment Supplied in packs of 3 cartridges Provides on-demand smoke for accurate testing and minimal wastage Non-pressurised for safe storage and transportation Small and lightweight, can easily be carried in pockets Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers Please note: Batch number shown in the images may not be the batch number of the units dispatched.

Solo 365 Replacement Smoke Generator

This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van

Solo A10 & A10S – Smoke Detector Test Aerosols

The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector. A choice of 150ml or 250ml canisters Delivers smoke replicated particles to a detector Provides a fast detector activation and clearing time Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser Non-flammable Non-toxic Produced no harmful residue Suitable for all types and makes of smoke detector UL and ULC listed

Testifire Replacement Smoke Capsules 3 or 6 Pack

These TS3 replacement smoke capsules are for use with Testifire remote testing equipment. The Testifire system is unique in that stimuli is created on demand rather than released from pressurised canisters. Available in either a three pack or a six pack, these capsules are a vital component of the remote testing system. Testifire also offer replacement carbon monoxide capsules for those using the 2000 series head unit. Designed for Testifire equipment Choice of 3 pack or 6 pack Generates smoke as and when needed Unlike most remote testing equipment, does not use stored pressure canisters Colour coded blue for simple identification Individual capsules weigh just 45g