Showing 25–36 of 40 results

Show sidebar
Show 9 12 18 24

Solo 908 – 4m Test Kit with Solo 365

The Solo 908 smoke detector testing kit is ideal as both an entry-level smoke testing kit or as an addition for any engineer's testing equipment. Supplied with a Solo 365 head unit, battery pack and universal charger, detector cup, smoke generator and cartridge, and a 2.2m access pole, this kit contains everything needed for engineers to start testing fire alarm systems. ASD systems can also be tested with the addition of a Solo 372 adaptor, while the incuded Solo 108 access pole is compatible with other Solo equipment such as the Solo 200 detector removal tool or the Solo 461 battery-powered heat detector test unit. Slimline design allows easy access to awkwardly positioned detectors Includes a Solo 108 telescopic access pole (2.2m length for a working height of 4 metres) Automatic LED torch for testing in dark areas Compatible with standard Solo poles including the 100 and 101 Solo 372 ASD adaptor (sold separately) allows testing of aspirating smoke detection systems Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Smaller, non-pressurised smoke cartridges for ease of storage and transport Lighter than standard Solo 330 tester with aerosols Automatically turns off after 10 minutes of inactivity to extend battery life
Read more
Quick view

Solo 911 – 6m Test and Removal Kit with Solo 365

The Solo 911 smoke detector testing kit allows engineers to reach heights of up to 6m without the need for ladders, harnesses, or other equipment that may need special training and risk assessments. Using the new Solo 365 testing system there is no longer a need to store or transport pressurised aerosols while the battery has also been changed to a much smaller and lighter design that charges via MicroUSB. These improvements make carrying spare batteries and test smoke much easier, especially with the Solo 610 protective bag, while the addition of the Solo 200 detector removal tool means that this kit is ideal for any fire alarm engineer. Lighter than standard Solo 330 tester with aerosols Automatically turns off after 10 minutes of inactivity to extend battery life Includes a Solo 100 telescopic access pole Also compatible with other Solo poles including the 108 and 101 Smaller, non-pressurised smoke cartridges for ease of storage and transport Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Slimline design enables access to awkwardly positioned detectors Auto-LED torch for testing in dark areas Also suitable for aspirating smoke detection systems with the Solo 372 ASD adaptor (sold separately)
Read more
Quick view

Solo A10 & A10S – Smoke Detector Test Aerosols

The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector. A choice of 150ml or 250ml canisters Delivers smoke replicated particles to a detector Provides a fast detector activation and clearing time Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser Non-flammable Non-toxic Produced no harmful residue Suitable for all types and makes of smoke detector UL and ULC listed
Read more
Quick view

Solo C3 – Carbon Monoxide Detector Tester

The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister. Introduces CO gas to the detector sensor Non-flammable To be used in conjunction with the Solo 330 dispenser A measured amount of CO gas is delivered in a controlled manner Concentration levels below the user danger level Supplied in a non-hazardous pressurised 250ml canister Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Read more
Quick view

Solo C6 – Hand-held Carbon Monoxide Detector Tester

Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner. For testing domestic carbon monoxide detectors Hand-held - no need for specialist dispensing equipment Supplied complete with applicator straw Introduces CO to the detector sensor in a controlled manner Contents: approx. 4 litres Non-flammable, compressed gas Due to the nature of the contents, the aerosol feels very lightweight Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Read more
Quick view

Solo Domestic Smoke and Carbon Monoxide Alarm Tester Kit

The Solo domestic smoke and carbon monoxide (CO) alarm tester kit is ideal for applications such as rented accommodation, where the landlord is responsible to ensure alarms are functional upon changeover of tenancy. Supplied with Solo A10 and Solo C3 aerosols, the large dispenser introduces smoke or CO without flooding the alarms. The 1.13m extension access pole ensures alarms at normal ceiling height can be reached without the need for ladders. Allows "functional" smoke and CO alarm testing to be carried out Extension access pole enables reach of alarms at normal ceiling height Kit includes Solo 332 Large Smoke Dispenser Solo 101 Extension Access Pole Solo A10 Smoke Detector Tester (150ml) Solo C3 Carbon Monoxide Detector Tester (250ml) Ideal for use by facilities management and maintenance companies Large smoke dispenser suitable for alarms up to 17.7cm/7" in diameter Introduces the activating element without flooding the alarms Suitable for most domestic smoke and CO alarms
Read more
Quick view

Testifire 1000 Smoke/Heat Detector Tester – Head Unit

Testifire products offer multi-sensor testing capabilities. The Testifire 1000-001 replacement smoke/heat detector tester can be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors that are out of reach. The unit is supplied with the required smoke capsule. Enables trained personnel to carry out "functional" testing on devices that are out of reach Capable of testing both heat and smoke detectors User friendly programmable interface Also suitable for aspirating smoke detector systems Powered by Solo 770 battery batons (sold separately) Ensures compliance with the Safe Working at Height Regulations 2005 Does not require stored pressure cylinders - smoke generated as needed from capsule Increased efficiency offers potential time saving of 45 minutes per day for users Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 1002 Smoke/Heat Detector Testing Kit.
Read more
Quick view

Testifire 1002 Smoke/Heat Detector Testing Kit

The Testifire 1002 Smoke/Heat detector testing kit offers amazing time saving benefits for those providing commercial detector testing services. With automated test initiation and bespoke, programmable test cycles, the Testifire 1002 kit offers substantial long term time and cost saving benefits. This kit also features a clearing function to remove any residual smoke or heat from the sensor quickly, reducing the time for each individual sensor test. Kit includes: Testifire 1000 smoke/heat detector tester TS3 smoke capsule Two Solo battery batons Solo 727 fast charger Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand
Read more
Quick view

Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit

The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage. Enables trained personnel to carry out "functional" testing on devices that are out of reach User friendly programmable interface Capable of testing smoke, heat and carbon monoxide (CO) detectors Also suitable for aspirating smoke detector systems Powered by Solo 770 battery batons (sold separately) Ensures compliance with the Safe Working at Height Regulations 2005 Does not require stored pressure cylinders - smoke and CO generated as needed from capsules Increased efficiency offers a potential time saving of up to 45 minutes per day for users Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.
Read more
Quick view

Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit

This product has been designed to revolutionise commercial fire alarm testing. The Testifire 2002 kit allows trained personnel to carry out "functional" testing on remote smoke, heat and carbon monoxide (CO) sensors without the need for scaffolding, harnesses or ladders. This presents the obvious safety benefits, but also allows users to save an estimated 45 minutes per day by removing the need to set up platforms etc. The device creates the necessary stimuli as needed, meaning there is zero waste, and also offers a clearing function meaning you can move on from having tested a device confident in the knowledge it is clear and ready to go. Kit includes: Testifire 2000 Smoke/Heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger User friendly programmable interface Automated infra-red test initiation Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed- both smoke and CO created on demand
Read more
Quick view

Testifire 6002 6m Smoke/Heat Detector Testing Kit

The Testifire 6002 smoke/heat detector testing kit offers an upgraded range of 6 metres which allows climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates an amazing time saving benefit for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6002 kit offers massive long term time and cost saving benefits for those carrying out "functional" testing on devices that are hard to reach by other means. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag as standard. Kit includes: Testifire 1000 smoke/heat detector tester TS3 smoke capsule Two solo battery batons Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 601-001 protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand
Read more
Quick view

Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit

The Testifire 6202 smoke/heat/CO detector testing system offers an extended reach of 6 metres, greatly improving it's range compared to the standard version. The kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates amazing time saving benefits for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6202 kit offers a versatile system that offers long term time and cost saving benefits. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag, making this the complete system. Kit includes: Testifire 2000 smoke/heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 601-001 protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life Allows trained personnel to carry out "functional" testing on smoke, heat and CO sensors No pressurised containers needed- stimuli created on demand for smoke and CO sensors
Read more
Quick view