Showing all 6 results

Testifire 9202 9m Smoke/Heat/CO Detector Testing Kit

The Testifire 9202 Smoke/Heat/CO detector tester system offers the longest reach of any remote testing apparatus. By boasting the ability to combine a 4.5 metre telescopic access pole with up to three standard extension poles, this kit allows users to highly customise the reach of the system. This massively improves its potential range compared to the standard version. As stated the kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on even the highest ceilings. Removing the need for extensive scaffolding creates immense time saving benefits for those conducting commercial detector testing. With automated test initiation, bespoke programmable test cycles and the longest reach available, the Testifire 9202 kit offers a versatile and complete system. Purchasing this kit is guaranteed to lead to long term time and cost saving benefits compared to the alternatives. This ultimate kit is completed with a universal detector removal tool and free protective storage/carry bag. Kit includes: Testifire 2000 Smoke/Heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger Solo 100-001 fibreglass 4.5m telescopic access pole Solo 101-001 fibreglass 1.13m extension pole Solo universal detector removal tool Solo protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed - stimuli created on demand for smoke and CO sensors

Testifire 6202 6m Smoke/Heat/CO Detector Testing Kit

The Testifire 6202 smoke/heat/CO detector testing system offers an extended reach of 6 metres, greatly improving it's range compared to the standard version. The kit is modular, meaning it can be used to access devices at standard heights as well as enabling climb-free access to detectors on higher ceilings. Removing the need for extensive scaffolding creates amazing time saving benefits for those carrying out commercial detector testing. With automated test initiation and bespoke, programmable test cycles, the Testifire 6202 kit offers a versatile system that offers long term time and cost saving benefits. This premium kit is supplied complete with a universal detector removal tool and protective storage/carry bag, making this the complete system. Kit includes: Testifire 2000 smoke/heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger Solo universal detector removal tool Solo 100-001 fibreglass 4.5m telescopic access pole Solo 601-001 protective carrying/storage bag Automated infra-red test initiation User friendly programmable interface Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Colour coded LED user feedback Automatic power-off feature after 5 minutes of inactivity to extend battery life Allows trained personnel to carry out "functional" testing on smoke, heat and CO sensors No pressurised containers needed- stimuli created on demand for smoke and CO sensors

Testifire 2001-001 Smoke/Heat/CO Detector Testing Kit

This product has been designed to revolutionise commercial fire alarm testing. The Testifire 2002 kit allows trained personnel to carry out "functional" testing on remote smoke, heat and carbon monoxide (CO) sensors without the need for scaffolding, harnesses or ladders. This presents the obvious safety benefits, but also allows users to save an estimated 45 minutes per day by removing the need to set up platforms etc. The device creates the necessary stimuli as needed, meaning there is zero waste, and also offers a clearing function meaning you can move on from having tested a device confident in the knowledge it is clear and ready to go. Kit includes: Testifire 2000 Smoke/Heat/CO detector tester TS3 smoke capsule TC3 carbon monoxide capsule Two solo battery batons Solo 727 fast charger User friendly programmable interface Automated infra-red test initiation Multiple test modes and test cycles Highly customisable test sequences including simultaneous testing Automatic power-off feature after 5 minutes of inactivity to extend battery life No pressurised containers needed- both smoke and CO created on demand

Testifire 2000 Smoke/Heat/CO Detector Tester – Head Unit

The Testifire range of products offer the best value multi-sensor testing equipment available. Testifire's 2000-001 replacement smoke/heat/CO detector tester head is designed to be used with your existing Solo telescopic or extension pole and helps remove the need for expensive scaffolding when testing detectors on high ceilings. The technologically advanced 2000 series allows for functional testing of not only smoke and heat sensors, but also carbon monoxide detectors. Testifire products generate the required sensor stimuli as and when needed. This removes the need to transport pressurised containers containing smoke or carbon monoxide to site, presenting a massive advantage. Enables trained personnel to carry out "functional" testing on devices that are out of reach User friendly programmable interface Capable of testing smoke, heat and carbon monoxide (CO) detectors Also suitable for aspirating smoke detector systems Powered by Solo 770 battery batons (sold separately) Ensures compliance with the Safe Working at Height Regulations 2005 Does not require stored pressure cylinders - smoke and CO generated as needed from capsules Increased efficiency offers a potential time saving of up to 45 minutes per day for users Please note: This listing is for the tester head unit ONLY. For a full kit including battery batons and charger, please see the Testifire 2002 Smoke/Heat/CO Detector Testing Kit.

Solo C6 – Hand-held Carbon Monoxide Detector Tester

Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner. For testing domestic carbon monoxide detectors Hand-held - no need for specialist dispensing equipment Supplied complete with applicator straw Introduces CO to the detector sensor in a controlled manner Contents: approx. 4 litres Non-flammable, compressed gas Due to the nature of the contents, the aerosol feels very lightweight Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.

Solo C3 – Carbon Monoxide Detector Tester

The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister. Introduces CO gas to the detector sensor Non-flammable To be used in conjunction with the Solo 330 dispenser A measured amount of CO gas is delivered in a controlled manner Concentration levels below the user danger level Supplied in a non-hazardous pressurised 250ml canister Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.