Showing 1–24 of 40 results

Solo 365 Smoke Detector Tester Head & Key Components Kit

The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time. 15% lighter than the Solo 330 Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles Slimline design enables access to awkwardly positioned detectors Smaller, non-pressurised smoke cartridges for ease of storage and transport Delayed start and manual purge options for ASD and non-standard detector testing Battery, cartridge, and generator status LEDs Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Auto-LED torch for testing in dark areas Test/clear cycle status indicators located at the bottom of the head for clear line of sight Proximity sensor automatically starts test and clear cycles for quicker testing Controlled smoke delivery for less wastage and more efficient testing Automatically turns off after 10 minutes of inactivity to extend battery life Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.

Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs

Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required. Allows the access of smoke detectors out of normal reach Non-conductive glass fibre extension and telescopic access poles Smoke dispenser introduces simulated smoke to the detector Pack includes: Solo A10 smoke detector tester (150ml canister) Solo 330 smoke dispenser Telescopic access or extension pole (three lengths available) Three access poles to choose from: Solo 101 - 1.13m extension pole (2.5m working height) Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Suitable for detectors up to 100mm/4" in diameter Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Solo 100 & 108 – Telescopic Access Poles

An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use. Suitable for use with both Solo and Testifire branded products Required for access to detectors out of normal reach Lightweight non-conductive glass fibre construction Optimum strength to weight ratio ensures minimum possible whip or bend at height Easy to use locking mechanism Available in two lengths: Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Designed for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Solo 101 – Extension Access Pole

The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive. Pole length: 1.13m Can be used: On its own to reach normal ceiling height In conjunction with a Solo telescopic access pole for additional height With Testifire and Solo testing devices Ideal for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Directive Allows for "functional" testing to be carried out Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles Non-conductive glass fibre construction protects engineer from inadvertent shorts

Solo 200 – Universal Detector Removal Tool

With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole

Solo 330 – Smoke Dispenser

The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights

Solo 332 – Large Smoke Dispenser

Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height. Allows "functional" smoke detector testing to be carried out UL listed Robust and lightweight Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery Clear cup ensures 360 degree view of the detector Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not included) Can be used with the Solo telescopic and extension access poles for safe testing at heights Suitable for use when testing domestic smoke and CO alarms

Solo 365 Adaptor for ASD Systems

Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment. No-fuss functional testing of aspirating smoke detection systems Designed for use only with Solo 365 equipment Quick and easy to fit while on the job Small and lightweight – can be kept on hand at all times Controlled smoke delivery for less wastage and more efficient testing Allows testing of both ASD and point detectors with a single, portable device Works with the Solo 365's delayed start and manual purge options Slimline design enables access to awkwardly positioned detectors Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.

Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)

The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out. Designed for use only with Solo 365 equipment Supplied in packs of 3 cartridges Provides on-demand smoke for accurate testing and minimal wastage Non-pressurised for safe storage and transportation Small and lightweight, can easily be carried in pockets Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers Please note: Batch number shown in the images may not be the batch number of the units dispatched.

Solo 365 Field Service Pack

Unlike other electronic detector testing systems, the Solo 365 does not require manufacturer refurbishment or servicing when any single component breaks, as the high-use parts are available for replacement by the user. The field service pack contains all user-replaceable components for the Solo 365 smoke detector test head, allowing engineers to carry spares everywhere they go to almost completely eliminate downtime due to damaged or worn-out equipment. Containing a cup and membrane, smoke generator module, and a battery, this kit includes almost everything needed to keep a Solo 365 in working order. Designed for use only with Solo 365 equipment Easy to install, field-replaceable design – no service requirement Test more detectors in less time by carrying spares instead of going back to the van The field service pack contains: 1x Cup & Membrane 1x Smoke Generator 1x Lithium Ion Battery Pack Small, lightweight component designs make carrying spares far easier Reduced downtime due to damaged equipment Please note: ES3 smoke cartridges and the universal charging kit are not included in this pack.

Solo 365 Replacement Cup and Membrane

The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage. Designed for use only with Solo 365 equipment Quick and easy to swap out while on the job Controlled smoke delivery for less wastage and more efficient testing See-through plastic lets engineers check indicator LEDs on detectors Contains simulated smoke to prevent wastage and increase test efficiency Works with the Solo 365's integrated proximity sensor for automated testing Pivots independently from the head unit to fit over hard-to-reach detectors

Solo 365 Replacement Smoke Generator

This replacement Smoke Generator for the Solo 365 smoke detector tester is designed to produce on-demand test smoke in conjunction with the ES3 Smoke Cartridge. As with most core components of the Solo 365, the Smoke Generator was created with the user in mind and is easy to replace should its performance drop for any reason. Designed for use only with Solo 365 equipment Works with the ES3 Smoke Cartridge Automatically creates smoke when the Solo 365 cup is over a detector head On-demand, 5-second smoke cycles prevent wastage and detector contamination Easy to install, field-replaceable design – no manufacturer service required Test more detectors in less time by carrying spares instead of going back to the van

Solo 365 Spare Battery Pack

The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site. Designed for use only with Solo 365 equipment Available individually and in packs of 4 Small, lightweight design makes carrying spares far easier than traditional Solo battery batons High-capacity Lithium Ion technology Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit Test more detectors in less time by carrying spares instead of going back to the van

Solo 365 Universal Charging Kit

The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere. Designed for use with the Solo 365 Battery Pack Works with most USB power sources and a wide range of international power supplies Supplied with transformer block to provide optimum voltage and current Simple click-on plug face design No large "power brick" required, reducing bulk and weight for transportation Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.

Solo 423 & 424 – Mains Powered Heat Detector Testers

The Solo mains powered heat detector testers are designed specifically for checking heat detectors using a genuine and safe heat source. Available in two voltage versions, the mains powered heat detector testers are supplied with a 5m (16ft) cable and are suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C (194 °F). The Solo telescopic poles allow the tester to access heat detectors at height, therefore eliminating the need for ladders or scaffolding. Provides detectors with a genuine and safe heat source Designed in accordance with the Construction Regulations 1996 and the Electricity at Work Regulations 1989 Suitable for the majority of modern heat detectors Can be used on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F Rapid activation times Available in two versions: Solo 423 - 110/120V Solo 424 - 220/240V Lightweight and easy to use Supplied with a 5m/16ft cable as standard Compatible with Solo telescopic poles for testing at height

Solo 425 – Heat Detector Tester 5m Extension Cable

Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height. Cable length: 5m/16ft Designed to help power Solo mains heat detector testers Needed for applications where multiple telescopic or extension poles are used Allows testing of heat detectors mounted at greater height

Solo 460 – Cordless Heat Detector Tester – Head Unit Only

The head unit only of the Solo 461 cordless heat detector tester is ideal for instances where you may have more than one technician working on site, or simply to replace a tester that has come to the end of its life. Using Cross Air Technology where heated air is blown across the cup, the Solo 460 cordless heat detector tester head unit provides rapid detector activation without the need for wiring. Replacement head unit only for the Solo 461 Cordless Heat Detector Tester Kit No wiring required - powered by battery batons (not included) Designed for use on fixed temperature, rate-of-rise and combination detectors to up 90 °C/194 °F (not Sabre) Lightweight and easy to use Test cup design allows clear view of the detector LED Uses Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor Suitable for use at height, low levels and angles Suitable for use in conjunction with Solo telescopic access poles Provides rapid detector activation Please note: this listing is for the tester head unit ONLY. For the full kit including battery batons and charger, please see Solo 461 Cordless Heat Detector Tester Kit.

Solo 461 – Cordless Heat Detector Tester Kit

The Solo 461 cordless heat detector tester is supplied with two 3.0Ah battery batons and a smart fast battery charger as standard. Requiring no wiring whatsoever, the cordless heat detector tester uses Cross Air Technology where air is heated, blown across the cup and directed at the detector sensor. The Solo 461 tester is suitable for use on fixed temperature, rate-of-rise and combination detectors up to 90 °C/194 °F and provides rapid detector activation. Unique Cross Air Technology: air is heated, blown across the cup and directed at the detector sensor UL and ULC listed No trailing cables - fully complies with Health and Safety at Work regulations Battery operated - supplied with two battery batons Provides rapid detector activation Suitable for most fixed temperature, rate-of-rise and combination detectors up to 90 °C/194° F (not Sabre) Visual low battery indicator Supplied with a smart fast battery charger (powered by mains lead or 12V DC socket adapter) Quiet fan motor for discreet operation Lightweight and easy to use Can be used at height when used in conjunction with a Solo telescopic access pole (sold separately) Suitable for use at angles 1 year manufacturer's warranty

Solo 610 – Protective Storage Bag

This protective storage/carrying bag is designed for use with Solo and Testifire smoke, heat and CO detector testing systems including head units, battery batons, chargers and aerosols. Ideal for use by technicians when visiting a site, the protective bag allows the Solo equipment to be carried with ease in a tidy and compact manner for a professional look. Helps to protect equipment from damage during transit and when not in use Provides a compact and tidy storage solution Designed for use with Solo and Testifire smoke, heat and CO detector testing products Suitable for storing head units, battery batons, chargers and aerosols A separate bag for access poles is including as standard Provides a professional look for when a technician attends site

Solo 727 – Fast Battery Charger

The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes. Designed for recharging Solo 770 battery batons Provides power for Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Offers a rapid charging time of just 90 minutes Supplied with 12V and mains connections Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.

Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton

The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly. Designed for use with the Solo cordless detector testers: Solo 460 – Heat Testifire 1000 – Smoke / Heat Testifire 2000 – Smoke / Heat / CO Negates the need for power cables, removing a potential trip hazard Supplied singularly New improved 3.0Ah model Rechargeable via the smart fast battery charger (not included) Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site

Solo 811 & 812 – Smoke Detector Test and Removal Kits

Smoke detectors need to be tested regularly to ensure that they are in full working order and ready for an emergency. Our smoke detector test and removal kit includes the equipment required for testing detectors out of normal reach as well as for removing units for inspection or replacement. Supplied with a telescopic access pole, the test and removal kits are available in two different working heights and include a handy protective storage bag. Ensures technicians comply with the Safe Working at Height Regulations 2005 Negates the need for ladders or expensive scaffolding Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo A10 smoke detector tester spray (150ml canister) Solo 610 Protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 2 x 1.13m extension poles (8.2m working height) Smoke dispenser is suitable for detectors up to 100mm/4" in diameter Removal tool creates various size combinations for the majority of detectors Non-conductive glass fibre access poles Allows "functional" testing to be carried out

Solo 814 – Smoke and Heat Detector Test and Removal Kit – Mains

The Solo 814 smoke and heat detector test and removal kit is supplied with a 4.5m telescopic access pole. Designed to be used with the dispenser, tester and removal tools, the access pole allows technicians to test detectors without having to climb and ensures compliance with the Safe Working at Height Regulations 2005. The smoke dispenser introduces simulated smoke to the detector, whilst the mains powered heat detector tester blows hot air into the sensor. Suitable for smoke detectors up to 100mm/4" in diameter and the majority of modern heat detectors Allows "functional" testing to be carried out Enables a working height of 6 metres Kit includes: Solo 4.5m telescopic access pole Solo 200 universal removal tool Solo 330 smoke dispenser Solo 220/240V mains powered heat detector tester Solo A10 smoke detector tester spray (150ml canister) Solo 610 protective carry/storage bag Telescopic pole has a non-conductive glass fibre construction Ensures compliance with the Safe Working at Height Regulations 2005 Single telescopic pole suits all three equipment head tools

Solo 822 & 823 – Smoke and Heat Detector Test and Removal Kit – Cordless

Available in two working heights, the cordless Solo smoke and heat detector test and removal kit includes all the equipment needed for the safe testing of detectors out of normal reach. The battery operated heat detector tester means that there are no trailing cables, ensuring compliance with the Health and Safety at Work regulations. The kit includes a 150ml canister of Solo A10 smoke detector tester spray as well as a protective carry bag for storing the equipment safely. Eliminates the need for ladders and expensive scaffolding Ensures compliance with the Safe Working at Height Regulations 2005 Kit includes: Solo 200 universal removal tool Solo 330 smoke dispenser Solo 461 cordless heat detector test set Solo A10 smoke detector tester spray (150ml canister) Solo 610 protective carry/storage bag Telescopic access pole(s) - depending on working height required Two working heights to choose from: 1 x 4.5m telescopic pole (6m working height) 1 x 4.5m telescopic pole AND 3 x 1.13m extension poles (9.3m working height) Non-conductive telescopic access and extension poles Suitable for the majority of modern smoke and heat detectors Detectors can be accessed out of normal reach No trailing cables - complies with the Health and Safety at Work regulations Smoke dispenser introduces simulated smoke to the detector Heat detector tester directs hot air into the sensor Allows "functional" testing to be carried out