Solo A10 & A10S – Smoke Detector Test Aerosols
The Solo A10 and A10S smoke detector tester aerosols contain a non-flammable, non-toxic simulated smoke and are designed for use in the Solo 330 or Solo 332. These dispensers provide a seal around the smoke detector, delivering the test smoke directly to the detector while helping to reduce the amount of A10 or A10S used per test. Supplied in either a 150ml or 250ml aerosol canister, the Solo tester sprays provide a quick alarm response and clearing time and are universally suitable for all types and makes of point smoke detector.
A choice of 150ml or 250ml canisters
Delivers smoke replicated particles to a detector
Provides a fast detector activation and clearing time
Allows for functional testing when used with the Solo 330 or Solo 332 smoke dispenser
Non-flammable
Non-toxic
Produced no harmful residue
Suitable for all types and makes of smoke detector
UL and ULC listed
Solo C3 – Carbon Monoxide Detector Tester
The Solo C3 carbon monoxide (CO) detector tester spray is designed for use in conjunction with the Solo 330 dispenser. Used in this controlled manner, the canister safely tests a CO detector by introducing a measured amount of CO gas to the sensor, whilst maintaining concentration levels below the toxic threshold. The Solo C3 tester is non-flammable and is supplied in a non-hazardous pressurised canister.
Introduces CO gas to the detector sensor
Non-flammable
To be used in conjunction with the Solo 330 dispenser
A measured amount of CO gas is delivered in a controlled manner
Concentration levels below the user danger level
Supplied in a non-hazardous pressurised 250ml canister
Please note: Some carbon monoxide detectors require a low level of CO present over a long period of time. It is unlikely that the Solo C3 will be suitable for testing these types of detectors.
Solo C6 – Hand-held Carbon Monoxide Detector Tester
Designed for use with domestic carbon monoxide (CO) detectors, the Solo C6 is a hand-held tester spray that does not require specialist equipment, such as dispensers. It is supplied with an applicator straw, which introduces CO to the detector sensor in a controlled manner.
For testing domestic carbon monoxide detectors
Hand-held - no need for specialist dispensing equipment
Supplied complete with applicator straw
Introduces CO to the detector sensor in a controlled manner
Contents: approx. 4 litres
Non-flammable, compressed gas
Due to the nature of the contents, the aerosol feels very lightweight
Please note: For testing FireAngel CO-9B and CO-9X carbon monoxide detectors, please use the FireAngel Easy Gas tester spray.
Solo 365 Universal Charging Kit
The Solo 365 Universal Charging Kit allows engineers to charge their Solo 365 batteries from almost any power source. Containing the correct type of USB cable for the battery and CE Marked transformer, the selection of changeable international plug faces enable even the most far-reaching companies to benefit from the new Solo 365 detector testing equipment. As it uses a standard USB connection this kit even works with most portable power banks and laptops, allowing the Solo 365 to be recharged almost anywhere.
Designed for use with the Solo 365 Battery Pack
Works with most USB power sources and a wide range of international power supplies
Supplied with transformer block to provide optimum voltage and current
Simple click-on plug face design
No large "power brick" required, reducing bulk and weight for transportation
Please note: The Solo 365 Head & Core Components Kit includes a Universal Charger Kit as standard.
Solo 425 – Heat Detector Tester 5m Extension Cable
Allowing technicians to test heat detectors without the need for ladders or scaffolding, Solo telescopic and extension access poles are used in conjunction with Solo mains powered heat detector testers. This 5m/16ft extension cable ensures that the Solo mains powered heat detector testers can be used where multiple poles are required to achieve a long working height.
Cable length: 5m/16ft
Designed to help power Solo mains heat detector testers
Needed for applications where multiple telescopic or extension poles are used
Allows testing of heat detectors mounted at greater height
Solo 365 ES3 Smoke Detector Tester Cartridge (Pack of 3)
The ES3 Smoke Cartridge for the Solo 365 smoke detector testing system is a non-pressurised and non-flammable cartridge that can easily be stored and transported without any specific safety measures, unlike the aerosols used by standard testing equipment. With a comparable test capacity to the Solo A3 and A10s aerosols when used as per manufacturer recommendations but at a greatly reduced size and weight, spare cartridges can be carried without worry or burden meaning there will be no need to return to the van when they run out.
Designed for use only with Solo 365 equipment
Supplied in packs of 3 cartridges
Provides on-demand smoke for accurate testing and minimal wastage
Non-pressurised for safe storage and transportation
Small and lightweight, can easily be carried in pockets
Comparable test capacity to the A3 and A10s aerosols for standard Solo dispensers
Please note: Batch number shown in the images may not be the batch number of the units dispatched.
Solo 365 Replacement Cup and Membrane
The Solo 365 has a clear cup to surround the smoke detector, containing the specially formulated synthetic smoke to achieve accurate functional testing without flooding and possibly contaminating the sensor. The translucent plastic allows engineers to to see the progress of each cycle as well as check any status indicator LEDs on the detector being tested. A membrane is fitted to the rim of the cup to help form a seal around the detector and further prevent wastage.
Designed for use only with Solo 365 equipment
Quick and easy to swap out while on the job
Controlled smoke delivery for less wastage and more efficient testing
See-through plastic lets engineers check indicator LEDs on detectors
Contains simulated smoke to prevent wastage and increase test efficiency
Works with the Solo 365's integrated proximity sensor for automated testing
Pivots independently from the head unit to fit over hard-to-reach detectors
Solo 101 – Extension Access Pole
The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive.
Pole length: 1.13m
Can be used:
On its own to reach normal ceiling height
In conjunction with a Solo telescopic access pole for additional height
With Testifire and Solo testing devices
Ideal for use with Solo detector equipment including:
Solo 330 Smoke Dispenser
Solo 461 Cordless Heat Detector Test Kit
Solo 423 & 424 Mains Powered Heat Detector Testers
Solo 200 Universal Detector Removal Tool
Ensures compliance with the Safe Working at Height Directive
Allows for "functional" testing to be carried out
Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles
Non-conductive glass fibre construction protects engineer from inadvertent shorts
Solo 365 Adaptor for ASD Systems
Designed for use with the Solo 365 smoke detector testing head unit, this firm rubber attachment facilitates quick and easy testing of ASD – aspirating smoke detection – systems by directing and containing the synthetic smoke to a small area directly over the sampling holes. The Solo 365's delayed start function combined with the adaptor's directed and contained flow of smoke provide engineers with a quick and efficient test cycle, cutting down on wastage. Due to its thin, flexible, and lightweight construction, the Solo 372 aspirating smoke detection system adaptor can easily be carried around sites and swapped out when needed, eliminating time spent moving between tests and the van to change equipment.
No-fuss functional testing of aspirating smoke detection systems
Designed for use only with Solo 365 equipment
Quick and easy to fit while on the job
Small and lightweight – can be kept on hand at all times
Controlled smoke delivery for less wastage and more efficient testing
Allows testing of both ASD and point detectors with a single, portable device
Works with the Solo 365's delayed start and manual purge options
Slimline design enables access to awkwardly positioned detectors
Please note: the Solo 365 head unit is shown for illustration purposes only and must be purchased separately.
Solo 365 Spare Battery Pack
The Solo 365 smoke detector tester is not compatible with the battery batons used for other testing equipment, such as the Testifire or Solo 400 series, and instead uses a new battery pack that fits in the head of the unit. Utilising high-capacity Lithium Ion technology, the new Solo 365 battery pack can be recharged by a standard MicroUSB cable from almost any power source while the small and lightweight design means spares can easily be carried around on site.
Designed for use only with Solo 365 equipment
Available individually and in packs of 4
Small, lightweight design makes carrying spares far easier than traditional Solo battery batons
High-capacity Lithium Ion technology
Rechargeable via MicroUSB from almost any power source with the Universal Charging Kit
Test more detectors in less time by carrying spares instead of going back to the van
Solo 770 – Cordless Heat Detector Tester Replacement 3.0Ah Battery Baton
The replacement battery baton provides power to Solo cordless detector tester, allowing the head unit to operate without the need for cabling. Ideal for keeping as a spare or to replace an existing unit, the battery baton is supplied singularly.
Designed for use with the Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Negates the need for power cables, removing a potential trip hazard
Supplied singularly
New improved 3.0Ah model
Rechargeable via the smart fast battery charger (not included)
Ideal for keeping as a spare in case of large applications or the need for multiple technicians on site
Solo 727 – Fast Battery Charger
The Solo cordless detector testers are powered by a rechargeable battery baton, allowing smoke, heat, and CO detectors to be tested without the need for cabling. The Solo fast battery charger is supplied with 12V and mains connections and is used to recharge the cordless heat detector tester battery batons. The charger is lightweight and provides a rapid charging time of 90 minutes.
Designed for recharging Solo 770 battery batons
Provides power for Solo cordless detector testers:
Solo 460 – Heat
Testifire 1000 – Smoke / Heat
Testifire 2000 – Smoke / Heat / CO
Offers a rapid charging time of just 90 minutes
Supplied with 12V and mains connections
Please note: The Solo 727 battery charger will NOT charge the Solo 760 battery.
