Showing 1–12 of 45 results

Dräger UCF® 9000

The thermal imaging camera UCF 9000 is thermal imaging and digital camera in one. It ensures you are well equipped even for complex tasks – from fire fighting and hazardous substance operations in Ex zone 1 to the monitoring and documentation of training.

Solo 365 Smoke Detector Tester Head & Key Components Kit

The Solo 365 smoke detector tester allows easy, functional testing of smoke detectors in any environment thanks to its light weight, built-in LED torch, and non-pressurised smoke cartridges that are far smaller than standard Solo aerosol cans. Combining the simplicity of the Solo 330/332 head with the intelligence and cartridge system of the Testifire range, the Solo 365 features an 'auto-start' proximity sensor that will automatically start and stop the testing process to reduce wasted smoke and let engineers move around sites quicker. The powerful 2600mAh / 9.5Wh Lithium Ion battery is considerably smaller and lighter than the batons used for Testifire systems, making the unit easier to carry and use, while the MicroUSB interface means recharging can be done almost anywhere at any time. 15% lighter than the Solo 330 Works with standard Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles Slimline design enables access to awkwardly positioned detectors Smaller, non-pressurised smoke cartridges for ease of storage and transport Delayed start and manual purge options for ASD and non-standard detector testing Battery, cartridge, and generator status LEDs Key components available as user-replaceable spares – no manufacturer service required! ES3 Smoke Cartridge Field Service Pack (smoke generator, battery, cup & membrane) Spare Battery Pack Smoke Generator Cup and Membrane Universal Charging Kit Auto-LED torch for testing in dark areas Test/clear cycle status indicators located at the bottom of the head for clear line of sight Proximity sensor automatically starts test and clear cycles for quicker testing Controlled smoke delivery for less wastage and more efficient testing Automatically turns off after 10 minutes of inactivity to extend battery life Please note: This kit does not include any access poles. Solo 100 / 108 Telescopic Access Poles and 101 Extension Access Poles are available separately or included with the Head Unit and other components in our Testing Kits.

Solo 808, 809 & 810 – Smoke Detector Testing Starter Packs

Our Solo smoke detector starter packs are made up of the equipment needed for smoke detector testing at entry level. As well as the Solo 330 smoke dispenser and the Solo A10 smoke detector tester spray, the kit includes an extension or telescopic access pole. There are three kits to choose from depending on the working height required. Allows the access of smoke detectors out of normal reach Non-conductive glass fibre extension and telescopic access poles Smoke dispenser introduces simulated smoke to the detector Pack includes: Solo A10 smoke detector tester (150ml canister) Solo 330 smoke dispenser Telescopic access or extension pole (three lengths available) Three access poles to choose from: Solo 101 - 1.13m extension pole (2.5m working height) Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Suitable for detectors up to 100mm/4" in diameter Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Dräger UCF® 6000

Easy to use and with one-hand controls, this camera delivers excellent image quality even under the most extreme conditions. The user-friendly thermal imaging camera Dräger UCF® 6000 is characterized by ease of use and essential, innovative functions.

Dräger UCF® 7000

Easy to use with one hand only. See more and make better decisions with optimal display options provided by the Dräger UCF® 7000 thermal imaging camera. The camera is intrinsically safe (ATEX zone 1) and offers the maximum level of safety and reliability

Dräger UCF® 8000

The robust thermal imaging camera Dräger UCF® 8000 delivers first-rate image quality and detailed precision. The camera is intrinsically safe and approved for use in potentially explosive atmospheres including zone 1 according to ATEX.

Dräger UCF® FireVista

Small, light, robust and can be operated with just one button: The compact thermal imaging camera Dräger UCF FireVista provides excellent picture quality even under the most difficult operating conditions. The camera is ready for immediate use and provide

Solo 100 & 108 – Telescopic Access Poles

An essential part of the Solo detector testing range, the Solo 100 and 108 telescopic access poles offer safe access to detectors installed at height. Without the need for ladders, the telescopic access poles ensure alarm technicians fully comply with the Safe Working at Height Regulations 2005. The non-conductive glass fibre construction protects the user and live equipment from inadvertent short circuits. Available in two lengths, the telescopic poles are lightweight and easy to use. Suitable for use with both Solo and Testifire branded products Required for access to detectors out of normal reach Lightweight non-conductive glass fibre construction Optimum strength to weight ratio ensures minimum possible whip or bend at height Easy to use locking mechanism Available in two lengths: Solo 108 - 2.2m telescopic pole (4m working height) Solo 100 - 4.5m telescopic pole (6m working height) Designed for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Regulations 2005 Allows "functional" testing to be carried out

Solo 101 – Extension Access Pole

The Solo 101 extension access pole, designed for use on its own or in conjunction with a Solo telescopic pole, allows for detector testing equipment to be used at normal ceiling height or up to a maximum working height of 9 metres. The extension access pole negates the need for ladders or expensive scaffolding and therefore ensures that alarm technicians fully comply with the Safe Working at Height Directive. Pole length: 1.13m Can be used: On its own to reach normal ceiling height In conjunction with a Solo telescopic access pole for additional height With Testifire and Solo testing devices Ideal for use with Solo detector equipment including: Solo 330 Smoke Dispenser Solo 461 Cordless Heat Detector Test Kit Solo 423 & 424 Mains Powered Heat Detector Testers Solo 200 Universal Detector Removal Tool Ensures compliance with the Safe Working at Height Directive Allows for "functional" testing to be carried out Testing equipment can be used at heights up to 9 meters using three extension poles and the Solo 100 or 108 access poles Non-conductive glass fibre construction protects engineer from inadvertent shorts

Solo 200 – Universal Detector Removal Tool

With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist in to place and the universal joint allows the tool to remain parallel with the ceiling. This makes it ideal for the removal of detectors installed in sloping ceilings. The Solo detector removal tool is to be used in conjunction with a Solo telescopic access pole and can also be used as part of a Testifire system. Universal design suits a wide range of detectors Various size combinations created with the colour coded twist grips Ideal for detector removal, inspection and replacement Quick and easy to use Suitable for the removal of detectors installed on sloping ceilings Designed for use in conjunction with a Solo telescopic access pole

Solo 330 – Smoke Dispenser

The Solo 330 smoke dispenser allows simulated smoke (not supplied) to be introduced to a detector sensing chamber in a safe and effective manner. Suitable for the majority of detectors (up to 100mm/4" in diameter), the Solo smoke dispenser has a test cup that provides a clear view of the detector LED, and its spring loaded mechanism helps to conserve the aerosol and minimise waste. To test smoke detectors installed at a height, the Solo 330 smoke dispenser can be used with a Solo telescopic access pole. Allows "functional" smoke detector testing to be carried out Durable construction and lightweight UL listed Universal: suitable for detectors up to 100mm/4" in diameter Sealed housing and spring loaded mechanism: optimises aerosol delivery and minimises waste Transparent test cup enables clear view of the detector LED while testing Suitable for use on suspended ceiling tiles Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not supplied) Used with the Solo telescopic access poles: enables safe testing at heights

Solo 332 – Large Smoke Dispenser

Fitted with a large clear cup, the Solo 332 is a smoke dispenser suitable for detectors up to 17.7cm/7" in diameter. Designed to introduce simulated smoke (not supplied) to a detector in an effective manner, the 332 allows a functional sensor test to be carried out. The dispenser is suitable for use with the Solo telescopic and extension access poles to enable safe smoke detector testing when installed at height. Allows "functional" smoke detector testing to be carried out UL listed Robust and lightweight Large dispensing cup suitable for detectors up to 17.7cm/7" in diameter Spring loaded mechanism and sealed housing minimises waste and optimises aerosol delivery Clear cup ensures 360 degree view of the detector Swing frame allows for use at/from angles Designed for use with Solo smoke and Solo CO aerosols (not included) Can be used with the Solo telescopic and extension access poles for safe testing at heights Suitable for use when testing domestic smoke and CO alarms